Interstate standard GOST 8273-75
"Wrapping paper. Specifications"
(approved by the decree of the USSR State Standard of March 24, 1975 N 721)
Packing paper. Specifications
Instead of GOST 8273-57
1. Brands and sizes
1.1. Depending on the purpose and quality indicators, wrapping paper should be produced in nine grades:
A - from sulphate unbleached cellulose;
B - from sulfate wrapping cellulose;
B - from sulphite unbleached cellulose;
D - from sulphite wrapping cellulose and wood pulp;
From sulphate, sulphite bleached cellulose;
From sulphate, sulphite bleached pulp, sulphite unbleached pulp and wood pulp;
D - from unbleached cellulose, semi-cellulose and wood pulp;
E - from waste paper, unbleached pulp and fibrous waste of pulp and paper production.
F - the composition is not standardized.
(Modified edition, Rev. N 1).
1.2. Paper of grades B, G, E and G, intended for packaging food products and medicines, must be manufactured with a composite composition approved by the USSR Ministry of Health.
(Modified edition, Amendment No. 3).
1.3. Paper should be produced in rolls and sheets. The width of the rolls and the dimensions of the sheet paper are set by agreement between the manufacturer and the consumer.
Limit deviations in paper sizes of all brands should not exceed mm, in paper intended for processing on automatic machines - mm.
Example symbol wrapping paper of grade A with a weight of paper with an area of 1 90 g:
Wrapping paper, grade A-90 GOST 8273.
(Modified edition, Rev. N 2, 3).
2. Technical requirements
2.1a. The paper must be made in accordance with the requirements of this standard for technological regulations, approved in the prescribed manner.
(Introduced additionally, Rev. N 2).
2.1. The paper quality indicators must comply with the standards specified in the table.
|
Indicator name |
Norm for paper stamps |
Limit deviations |
Test Method |
||||||||
|
1. Weight of paper with an area of 1 m2, g |
For paper grades A, B, O_1, O_2, D with an area mass of 1 m2 up to (90 + -2) g For paper of other grades and weights + -4_5 |
||||||||||
|
2. Relative bursting resistance, kPa (kgf / cm2), not less, for paper with an area of 1 m2, g |
GOST 13525.8 |
||||||||||
|
3. Breaking length on average in two directions, m, not less, for a mass of paper with an area of 1 m2, g |
GOST 13525.1 |
||||||||||
| Designation | GOST 8273-75 |
| Title in Russian | Wrapping paper. Technical conditions |
| Title in English | Packing paper. Specifications |
| Effective date | 01.01.1976 |
| OKS | 55.040 |
| OKP code | 543500 |
| KGS code | K68 |
| OKSTU code | 5435 |
| GRNTI heading index | 664533; 664537 |
| Abstract (scope) | This standard applies to paper for the packaging of food, medicine and industrial products. |
| Keywords | wrapping paper; brands; sizes; quality indicators ; |
| Type of standard | Product (service) standards |
| Requirements type | Requirements for mandatory certification; The document is marked * |
| Designation of the replaceable (s) | GOST 8273-57 |
| Normative references to: GOST | GOST 1641-75; GOST 7629-93; GOST 8047-93; GOST 8049-62; GOST 13199-88; GOST 13523-78; GOST 13525.1-79; GOST 13525.5-68; GOST 13525.8-86; GOST 13525.19-91; GOST 21102-80 |
| Rostekhregulirovanie Department | 320 - Office of standardization and certification of raw materials and materials |
| MND developer | the Russian Federation |
| Interstate TC | 177 - Cellulose, paper, cardboard and industrial materials for various purposes |
| Date of last edition | 01.10.1998 |
| Change number (s) | reprint with rev. one; 2; 3 |
| Number of pages (original) | 8 |
| Organization - Developer | Minlesprom of the USSR |
| Status | Active |
WRAPPING PAPER
TECHNICAL CONDITIONS
GOST 8273-75
USSR STATE COMMITTEE
Moscow
STATE STANDARD OF THE UNION OF SSR
Resolution of the State Committee of Standards of the Council of Ministers of the USSR dated March 24, 1975 No. 721
the date of introduction is set
from 01.01.76
Resolution of the State Standard of 03/27/85 No. 880
validity period extended
until 01.01.91
on paper intended for food packaging , medicines and industrial products.
Mandatory requirements for product quality are set out in clause 2.1 (table, indicators 2-5)
* Reprinted (March 1986) with Amendments No. 1, 2 , approved in January 1981, March 1985 (IUS 3-81, 6-85).
AIMERS from purpose and quality indicators, wrapping paper should be produced in nine grades:
BUT- from sulphate unbleached cellulose;
B - from sulfate wrapping cellulose;
B - from sulphite unbleached cellulose;
G - wrapping cellulose and wood pulp;
Sulphite bleached pulp; sulphite bleached pulp , sulphite unbleached pulp and wood pulp; cellulose, semi-cellulose and wood pulp ; of cellulose and fibrous waste of pulp and paper production. position is not standardized. amended edition, Amendment. No. 1, No. 3). Line C, D, E and F of packaging of food and medicine , must be manufactured with a composite composition, authorized by the USSR Ministry of Health.
(Modified edition. Amendment No. 3).
and manufactured in rolls and sheets. The width of the rolls and the dimensions of sheet paper are established by agreement between the manufacturer and the consumer. The sizes of paper of all brands should not exceed paper intended for processing on automatic machines - ± 2 mm. measures of conventional designation of wrapping paper grade D weighing paper with an area of 1 m 2 90 g: A-90 GOST 8273-75.ya, rev. No. 2, No. 3).
2. TECHNICAL REQUIREMENTS
made in accordance with the requirements of this standard for technological regulations, approved in accordance with the established procedure. No. 2). The quality of the paper must comply with the standards specified in the table. No. 1).|
Indicator name |
Norm for paper stamps |
Limit deviations |
Test Method |
||||||||
|
1. Weight of paper with an area of 1 m 2 , G |
For paper grades A , B , About 1 , About 2 , D with an area mass of 1 m 2 up to (90 ± 2) g |
||||||||||
|
For paper of other grades and weights |
|||||||||||
| 60 | |||||||||||
| 5 | |||||||||||
| 0 | |||||||||||
| bursting resistance, kPa (kgf / cm not less, for paper with an area of 1 m2 | 25.8-86 | ||||||||||
| breakout length on average in two directions, m, not less, for a mass of paper with an area of 1 m 2 , G |
GOST 13525.1-79 |
||||||||||
| 00 | |||||||||||
| 55 | 500 | 700 | 00 | ||||||||
| 000 | |||||||||||
| 200 | |||||||||||
| 0-120 | 00 | 00 | 00 | 600 | 0 | ||||||
| 0-160 | |||||||||||
|
4. Degree of gluing , mm , not less |
GOST 8049-62 |
||||||||||
|
5. Humidity , %, no more |
-71 | ||||||||||
Upon agreement with the consumer, it is allowed to produce paper of grades A , IN, D weighing 1 m 2 90 g and more with breaking length, respectively 5000
E with a mass of 1 mei with a breaking length of at least 2000 m ;
Rki Zh with a mass of 1 m and a length of at least 2900 m
Oh, at least 2700 m long.
(Modified edition. Amendment No. 3).
between the manufacturer and the consumer, it is allowed to produce paper of all grades of non-glued, machine-made, one-sided and two-sided smoothness. to make the color of natural fiber or dyed. loose food products, it is allowed to use paper dyed in various colors with dyes approved by the USSR Ministry of Health; for the packaging of other food products, the use of colored paper is not allowed. grades B, D, O 1 and O 2 intended for printing must be made with an ash content of at least 8% and a breaking length of at least 1700 m, rev. No. 1, No. 3).
2.5a. By agreement with the consumer, it is allowed to produce paper of grades A and E with a moisture content of up to 11%.
(Introduced additionally. Amendment No. 3).
Tears, holes that cannot be detected during the rewinding process are allowed in roll paper if the mass of sheets with such defects, determined by, does not exceed 5%, and in roll paper intended for processing: on machines in the food industry - 3%. revised edition, rev. No. 2)., Intended for processing on automatic machines, the winding of the roll paper must be uniform and dense
(Modified edition. Amendment No. 3).
the layer of breaks in a roll should not exceed five, and in a roll of paper intended for processing on automatic machines of the food industry, should not exceed three. in paper intended for processing on automatic machines, they should be glued together and marked with colored signals visible from the end of the roll.
3. ACCEPTANCE
(Modified edition. Amendment No. 3).
e batches and sample size - according to GOST ST 8047-78. if unsatisfactory test results are obtained for at least one of the indicators, repeated tests are carried out on a double sample from the same batch. Repeated tests apply to the entire batch. new edition, Amendment. No. 2).
4. TEST METHODS
4.1a. Sampling and preparation for testing - in accordance with GOST 8047-78.
o, rev. No. 2). Paper conditioning before testing and testing is carried out in accordance with GOST 13523-78 at relative humidity air (50 ± 2)% and temperature (23± 1) ° C. flax conditioning - at least 2 hours.
(Modified edition, Amendment No. 2, No. 3).
4.2. Paper sizes are determined in accordance with GOST 21102-80.
and the mass fraction of ash, the calcination temperature is set (575 ± 25) ° С in accordance with GOST 7629-77. additionally, rev. No. 2, No. 3) .. PACKAGING, LABELING, TRANSPORTATION AND STORAGE Storing, storage and transportation - in accordance with GOST 1641-75 with the following addition: paper not intended for food packaging is supplemented with a warning inscription “non-food”. 2. The diameter of the roll must be at least 50 cm. At the request of consumers, the diameter of the roll must be at least 35 cm, which is not intended for processing on automatic machines. naya edition, rev. No. 2).
5.3. (Deleted, Amendment No. 2).
5.4. (Deleted, Amendment No. 3).
5.5. (Deleted, Amendment No. 2).
Directory of GOSTs, TU, standards, norms and rules. SNiP, SanPiN, certification, technical conditionsINTERSTATE STANDARD
WRAPPING PAPER
TECHNICAL CONDITIONS
Official edition
IPK PUBLISHING STANDARDS Moscow
INTERSTATE STANDARD
WRAPPING PAPER Specifications
Packing paper. Specifications
Date of introduction 01.01.76
This standard applies to paper for the packaging of food, medicine and industrial products.
(Modified edition, Rev. N ° 3).
1. BRANDS AND SIZES
1.1. Depending on the purpose and quality indicators, wrapping paper should be produced in nine grades:
A - from sulphate unbleached cellulose;
B - from sulfate wrapping cellulose;
B - from sulphite unbleached cellulose;
D - from sulphite wrapping cellulose and wood pulp;
О] - from sulphate, sulphite bleached cellulose;
0 2 - from sulphate, sulphite bleached pulp, sulphite unbleached pulp and wood pulp;
D - from unbleached cellulose, semi-cellulose and wood pulp;
E - from waste paper, unbleached pulp and fibrous waste of pulp and paper production.
F - the composition is not standardized.
(Modified edition, Amendment No. 1).
1.2. Paper of grades B, G, E and Zh, intended for packaging food products and medicines, must be made with a composite composition approved by the USSR Ministry of Health.
1.3. Paper should be produced in rolls and sheets. The width of the rolls and the dimensions of the sheet paper are set by agreement between the manufacturer and the consumer.
Limit deviations in paper sizes of all brands should not exceed +5 mm, in paper intended for processing on automatic machines - +2 mm.
An example of a symbol for wrapping paper of grade A weighing paper with an area of 1 m 2 90 g:
Wrapping paper, grade A-90 GOST 8273.
Official edition
Reprinting prohibited
© Standards Publishing House, 1975 © I PC Standards Publishing House, 1998 Reissued with Changes
2. TECHNICAL REQUIREMENTS
2.1a. The paper must be made in accordance with the requirements of this standard for technological regulations, approved in the prescribed manner.
(Introduced additionally, Rev. N ° 2).
2.1. The paper quality indicators must comply with the standards specified in the table.
|
Name indicator |
Norm for paper stamps |
Limit deviations |
trials |
||||||||
|
1. Weight of paper | |||||||||||
|
with an area of 1 m 2, g |
magicians brands | ||||||||||
|
2. Relative | |||||||||||
|
new resistance | |||||||||||
|
pushing through | |||||||||||
|
vaniya, kPa | |||||||||||
|
(kgf / cm 2), not me- | |||||||||||
|
her, for paper | |||||||||||
|
with an area of 1 m 2, g | |||||||||||
|
3. Bursting | |||||||||||
|
average length | |||||||||||
|
in two directions | |||||||||||
|
niyam, m, not less, | |||||||||||
|
for paper weight | |||||||||||
|
with an area of 1 m 2, g | |||||||||||
|
4. The degree of | |||||||||||
|
adhesive, mm, not | |||||||||||
|
5. Humidity, | |||||||||||
|
%, no more | |||||||||||
Notes:
1. By agreement with the consumer, it is allowed to produce paper of grades A, B, D weighing 1 m 2 90 g or more with a breaking length of at least 5000, 3300, 2400 m, respectively.
2. Paper containing in the composition more than 50% of waste paper and waste of pulp and paper production, it is allowed to make:
grade E weighing 1 m 2 60 g and more with a breaking length of at least 2000 m; brand Zh with a mass of 1 m 2 90-120 g with a breaking length of at least 2900 m, a weight of 1 m 2 130-160 g with a breaking length of at least 2700 m.
(Modified edition, Rev. JV ° 1, 3).
2.2. By agreement between the manufacturer and the consumer, it is allowed to produce non-glued paper of all grades.
2.3. The paper is made of machine, one-sided and two-sided smoothness.
2.4. The paper should be made in natural fiber color or dyed.
For packaging bulk food products, it is allowed to use paper painted in various colors with dyes approved by the USSR Ministry of Health; for packaging other food products, the use of colored paper is not allowed.
2.5. Papers of grades V, D, O] and 0 2 intended for printing must be made with an ash content of at least 8% and a breaking length of at least 1700 m.
(Modified edition, Amendments No. 1, 3).
2.5a. By agreement with the consumer, it is allowed to produce paper of grades A and E with a moisture content of up to 11%.
(Introduced additionally, Rev. N ° 3).
2.6. Folds, tears, holes that cannot be detected during the rewinding process are allowed in roll paper, if the mass of sheets with such defects, determined in accordance with GOST 13525.5, does not exceed 5%, and in roll paper intended for processing on automatic machines in the food industry, - 3%.
2.7. For paper to be recycled on automatic machines, the roll paper must be wound evenly and tightly, and the edges must be smooth and clean.
(Modified edition, Amendment No. 3).
2.8. The number of breaks in a roll should not exceed five, and in a roll of paper intended for processing on automatic machines in the food industry, should not exceed three.
2.9. Places of breaks in paper intended for processing on automatic machines must be glued together and marked with colored signals visible from the end of the roll.
3. ACCEPTANCE
3.1. Determination of the lot and sample size - according to GOST 8047.
3.2. Upon receipt of unsatisfactory test results for at least one of the indicators, repeated tests are carried out on a double sample from the same batch.
Retest results apply to the entire batch.
(Modified edition, Amendment No. 2).
4. TEST METHODS
4.1a. Sampling and preparation for testing - in accordance with GOST 8047.
(Introduced additionally, Amendment No. 2).
4.1. Conditioning of paper before testing and testing is carried out in accordance with GOST 13523 at a relative humidity of (50 + 2)% and a temperature of (23 + 1) ° C.
Duration of conditioning - at least 2 hours.
(Modified edition, Amendments No. 2, 3).
4.2. Paper sizes are determined in accordance with GOST 21102.
4.3. When determining the mass fraction of ash, the calcination temperature is set (575 + 25) ° C in accordance with GOST 7629.
(Modified edition, Amendments No. 2, 3).
5. PACKAGING, LABELING, TRANSPORTATION AND STORAGE
5.1. Packing, marking, storage and transportation - according to GOST 1641 with the following addition:
5.1.1. The labeling of paper not intended for food packaging is supplemented with a non-food warning label.
5.2. The roll diameter must be at least 50 cm. At the request of consumers, a roll diameter of at least 35 cm is allowed, which is not intended for processing on automatic machines.
5.1-5.2. (Modified edition, Rev. N ° 2).
5.3. (Deleted, Amendment No. 2).
5.4. (Deleted, Amendment No. 3).
5.5. (Deleted, Amendment No. 2).
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the USSR Ministry of Forestry DEVELOPERS
I.A. Chizhova, O.A. Vasilieva, Cand. tech. sciences
2. APPROVED AND INTRODUCED INTO EFFECT by the Resolution of the State Committee of Standards of the Council of Ministers of the USSR of March 24, 1975 N ° 721
3. REPLACE GOST 8273-57
4. REFERENCE REGULATORY AND TECHNICAL DOCUMENTS
|
Item number, sub-item |
|
|
GOST 1641-75 | |
|
GOST 7629-93 | |
|
GOST 8047-93 | |
|
GOST 8049-62 | |
|
GOST 13199-88 | |
|
GOST 13523-78 | |
|
GOST 13525.1-79 | |
|
GOST 13525.5-68 | |
|
GOST 13525.8-86 | |
|
GOST 13525.19-91 | |
|
GOST 21102-80 |
5. The limitation of the period of validity was removed according to the protocol No. 5-94 of the Interstate Council for Standardization, Metrology and Certification (NUS 11-12-94)
6. REVISED (October 1998) with Amendments N ° 1, 2, 3, approved in January 1981, March 1985, March 1990 (NUS 3-81, 6-85, 6-90)
Editor M.I. Maksimova Technical editor Y.S. Grishanova Proofreader O.V. Ladle
Computer layout E.I. Martemyanova
Ed. persons. No. 021007 dated 08/10/95. Donated to the set 09/29/98. Signed for printing on 23.11.98. Uel. print l. 0.93. Uch.-ed. l. 0.48.
Circulation 271 copies. S1450. Zach. 809.
IPK Standards Publishing House, 107076, Moscow, Kolodezny per., 14.
Typeset in the Publishing House on a PC
Branch IPK Publishing house of standards - type. "Moscow printer", Moscow, Lyalin per., 6.
Plr No. 080102
to GOST 8273 75 * Wrapping paper. Technical conditions
* The amendment is valid on the territory of the Russian Federation.
Resolution of the State Committee of Standards of the Council of Ministers of the USSR dated March 24, 1975 No. 721
the date of introduction is set
from 01.01.76
Resolution of the State Standard of 03/27/85 No. 880
validity period extended
until 01/01/91
This standard applies to paper for the packaging of food, medicine and industrial products.
Mandatory requirements for product quality are set out in clause 2.1 (table, indicators 2-5)
* Re-edition (March 1986) with Amendments No. 1, 2, approved in January 1981, March 1985 (IUS 3-81, 6-85).
1. BRANDS AND SIZES
1.1. Depending on the purpose and quality indicators, wrapping paper should be produced in nine grades:
A - from sulphate unbleached cellulose;
B - from sulfate wrapping cellulose;
B - from sulphite unbleached cellulose;
D - from sulphite wrapping cellulose and wood pulp;
О 1 - from sulphate, sulphite bleached cellulose;
О 2 - from sulphate, sulphite bleached cellulose, sulphite unbleached cellulose and wood pulp;
D - from unbleached cellulose, semi-cellulose and wood pulp;
E - from waste paper, unbleached pulp and fibrous waste of pulp and paper production.
F - the composition is not standardized.
(Modified edition, Amendment No. 1, No. 3).
1.2. Paper of grades V, G, E and Zh, intended for packaging food products and medicines, must be manufactured with a composite composition approved by the USSR Ministry of Health.
(Modified edition. Amendment No. 3).
1.3. Paper should be produced in rolls and sheets. The width of the rolls and the dimensions of the sheet paper are set by agreement between the manufacturer and the consumer.
Limit deviations in paper sizes of all brands should not exceed ± 5 mm, in paper intended for processing on automatic machines - ± 2 mm.
An example of a symbol for wrapping paper of grade D weighing paper with an area of 1 m 2 90 g:
Wrapping paper, grade A-90 GOST 8273-75.
2. TECHNICAL REQUIREMENTS
2.1a. The paper must be made in accordance with the requirements of this standard for technological regulations, approved in the prescribed manner.
(Introduced additionally, Amendment No. 2).
2.1. The paper quality indicators must comply with the standards indicated in the table.
(Modified edition, Amendment No. 1).
|
Indicator name |
Norm for paper stamps |
Limit deviations |
Test Method |
||||||||
|
1. Weight of paper with an area of 1 m 2, g |
For paper grades A, B, O 1, O 2, D with an area mass of 1 m 2 up to (90 ± 2) g |
||||||||||
|
For paper of other grades and weights |
|||||||||||
|
2. Relative bursting resistance, kPa (kgf / cm 2), not less, for paper with an area of 1 m 2, g |
|||||||||||
|
3. Breaking length on average in two directions, m, not less, for a mass of paper with an area of 1 m 2, g |
|||||||||||
|
4. Degree of gluing, mm, not less |
|||||||||||
|
5. Moisture,%, no more |
|||||||||||
Notes:
1. By agreement with the consumer, it is allowed to produce paper of grades A, B, D weighing 1 m 2 90 g or more with a breaking length of at least 5000, 3300, 2400 m, respectively.
grade E weighing 1 m 2 60 g and more with a breaking length of at least 2000 m;
brand Zh weighing 1 m 2 90-120 g with a breaking length of at least 2900 m;
weighing 1 m 2 130-160 g with a breaking length of at least 2700 m.
(Modified edition. Amendment No. 3).
2.2. By agreement between the manufacturer and the consumer, it is allowed to produce non-glued paper of all grades.
2.3. The paper is made of machine, one-sided and two-sided smoothness.
2.4. The paper should be made in natural fiber color or dyed.
For packaging bulk food products, it is allowed to use paper painted in various colors with dyes approved by the USSR Ministry of Health; for packaging other food products, the use of colored paper is not allowed.
2.5. Papers of grades V, D, O 1 and O 2 intended for printing must be made with an ash content of at least 8% and a breaking length of at least 1700 m.
(Modified edition, Amendment No. 1, No. 3).
2.5a. By agreement with the consumer, it is allowed to produce paper of grades A and E with a moisture content of up to 11%.
(Introduced additionally. Amendment No. 3).
2.6. Folds, tears, holes that cannot be detected during the rewinding process are allowed in roll paper if the mass of sheets with such defects, determined in accordance with GOST 13525.5-68, does not exceed 5%, and in roll paper intended for processing: on food machines industry - 3%.
2.7. For paper to be recycled on automatic machines, the roll paper must be wound evenly and tightly, and the edges must be smooth and clean.
(Modified edition. Amendment No. 3).
2.8. The number of breaks in a roll should not exceed five, and in a roll of paper intended for processing on automatic machines in the food industry, should not exceed three.
2.9. Places of breaks in paper intended for processing on automatic machines must be glued together and marked with colored signals visible from the end of the roll.
3. ACCEPTANCE
(Modified edition. Amendment No. 3).
3.1. Determination of the lot and sample size - according to GOST 8047-78.
3.2. Upon receipt of unsatisfactory test results for at least one of the indicators, repeated tests are carried out on a double sample from the same batch.
Retest results apply to the entire batch.
(Modified edition, Amendment No. 2).
4. TEST METHODS
4.1a. Sampling and preparation for testing - in accordance with GOST 8047-78.
(Introduced additionally, Amendment No. 2).
4.1. Conditioning of paper before testing and testing is carried out in accordance with GOST 13523-78 at a relative humidity of (50 ± 2)% and a temperature of (23 ± 1) ° С.
Duration of conditioning - at least 2 hours.
(Modified edition, Amendment No. 2, No. 3).
4.2. Paper sizes are determined in accordance with GOST 21102-80.
4.3. When determining the mass fraction of ash, the calcination temperature is set (575 ± 25) ° C in accordance with GOST 7629-77.
(Introduced additionally, Amendment No. 2, No. 3).
5. PACKAGING, LABELING, TRANSPORTATION AND STORAGE
5.1. Packing, marking, storage and transportation - according to GOST 1641-75 with the following addition:
5.1.1. The labeling of paper not intended for food packaging is supplemented with a non-food warning label.
5.2. The diameter of the roll must be at least 50 cm. At the request of consumers, a roll diameter of at least 35 cm is allowed, which is not intended for processing on automatic machines.
5.1, 5.2. (Modified edition, Amendment No. 2).
5.3. (Deleted, Amendment No. 2).
5.4. (Deleted, Amendment No. 3).
5.5. (Deleted, Amendment No. 2).
The standard for the production and characteristics of wrapping paper is GOST 8273-75. It contains all the standards associated with this material, affecting the quality of the finished product, permissible dimensional deviations, as well as storage and transportation conditions.
Technical conditions
Pakland LLC products manufactured in accordance with GOST meet all sanitary and hygienic standards and can be used for food packaging. The material does not allow moisture and grease to pass through; it is additionally used for packing flowers, books, parcels, dishes and other consumer goods.
It is produced in rolls and sheets on modern automated equipment under the strict guidance of experienced specialists, which completely excludes the appearance of defects, therefore we guarantee the quality of the goods we supply to our customers.
Even metal objects can be packed into it, but there are already certain limitations, so an individual approach is needed. Our managers are ready to advise and explain all the technical nuances of using this product.
Paper stamps
The following brands of paper are available:
- O1;
- O2;
The most popular of these is the E-grade wrapping paper. Their quality decreases from the first to the last grade, but so does the cost. NS Operational characteristics do not drop much. That is why cheap materials are more popular.
The density of the material varies from 60 to 160 g / m2, and 80 g / m2 is the most demanded today.
You can buy wrapping paper GOST 8273-75 at a low price in the Pakland company. We offer significant discounts on wholesale lots, but we also work with retail. Our clients include both physical and legal entities not only in Moscow and the region, but throughout Russia.
