Cumulative water heaters have become an excellent way out to solve a problem with the lack of hot water supply. They are installed not only in private homes, but also in apartments where problems are often observed hot water (especially, in the summer, when the routes are repaired). The optimal purchase for a family of two or three people will be a cumulative water heater for 80 liters. This volume is enough for all households. And in this review we will look at the most popular boilers models of the specified container.
Popular models of water heaters
Cumulative boilers with a volume of 80 liters are fairly common water heating equipment. They are optimal for a family of two people - you can easily take a shower with each other, and also make a wash of dishes at the same time with shower treatments. They are also suitable for those who live threesome. Of course, the optimal with such quantity of people will be a water heater per 100 liters, but you can get along and a boiler for 80 liters - especially if the third person is a child who does not consume a lot of water.
As for the adoption of the bath, for this procedure, the water heater does not require 80, and at least 100 liters - and that is enough for one person only.
In stores plumbing and heat engineering we can buy boilers from a variety of manufacturers. Their main differences:
- Tank manufacturing material - here are the leads of stainless steel tanks;
- The amount of Tan - there are modifications with two Tanes, providing a quick heating of water;
- Molding method - vertical or horizontal;
- Management - electronic or mechanical;
- Maximum temperature - varies from +60 to +90 degrees.
Let's see what we can choose in stores.
We are in front of us the best water heater accumulative electric volume of 80 liters. He got the highest user ratings, becoming the leader of our review. The unit is made in a vertical flat housing and is equipped with a 2,5 kW producing.Multiple waterproof points are connected to it, and in order for consumers to do not have to wait long, the device was given the function of rapid water heating. Other advantages of the water heater:
- Stainless steel tank for 80 liters - it is distinguished by resistance to corrosion;
- Pressure resistance up to 7 atmospheres;
- Electronic control with the information display;
- Magnesium anode for additional protection against corrosion;
- Gorgeous case design.
The 80 liter boiler from Polaris does not look like "puzzled", occupying at least places in the room where it is installed. As for users, their opinion converges in the fact that this is the most reliable water heater that performs its work for five with a plus.
The price of this model may seem slightly overpriced, but it is worth it - you will not spend almost 13 thousand rubles in vain.
If you need an electrical heater accumulator for 80 liters from a good brand, we recommend to look at this model. Thanks to the flat housing, the boiler can be installed in any room where it will look extremely gently, not rushing into the eyes. The power of the Tan used is 2.5 kW, the tank is made of steel coated with reliable and durable glass-ceramic. The unit is mounted vertically, the connecting pipes are suitable for it from below.
The control system in this water heater for 80 liters is mechanical, the temperature controller together with the inclusion indicators is put on the front panel. To protect against corrosion inside there is a magnesium anode. The boiler received good feedback from users already consisted, although some complain about a weak tank metal. However, this may be associated with a single marriage.
The cost of this water heater for 80 liters is about 13.5 thousand rubles - the influence of the brand affects.
Electric boilers for 80 liters can be attached not only vertically, but also horizontally, under the most ceiling. The typical representative is the horizontal flat model Polaris FDRS-80H. Consider its main characteristics and features:
- Easy temperature adjustment using the knob on the front panel;
- Electronic indication of the current temperature mode;
- Maximum temperature - up to +75 degrees;
- Built-in magnesium anode to protect against corrosion;
- Power consumption - 2 kW;
- Mechanical control system;
- Built-in safety valve;
- Reliable copper heating elements - 2 pcs;
- Lower pipe pipe.
Excellent boiler with comfortable fasteners and high reliability tests. The cost of the aggregate is about 14 thousand rubles.
If there is very little money in your pocket, and hot water is needed, we recommend choosing and install in your home an inexpensive water heater for 80 liters of OASIS VC-80L. It is made in a traditional cylindrical body painted in white.For heating of water to a given temperature, TEN responds with a capacity of only 1.5 kW - this is not enough, so the water will warm up somewhat longer than in the above-described models. The maximum heating temperature is up to +75 degrees.
The estimated cost of this water heater for 80 liters is slightly over 6 thousand rubles, which makes it one of the most affordable. But for such a low cost, it is necessary to pay far from the most reliable coverage of the inner tank - here it is made of enamel, but all the same magnesium anode comes to help him (it will have to change it more often). No special functions or interesting features In the apparatus there is no typical budget model for economical users.
Flat electric accumulator water heater for 80 liters from Timberk brand will have to do those who are not used to save on household appliances. The unit is characterized by not bad external species And not the thick corps - its thickness is only 27 cm. It is equipped with reverse and safety valves, system protection against overheating, magnesium anode and stainless steel tank.
Water heater Timberk SWH FSM4 80 H Capacity 80 liters can operate in several modes, providing economical electricity consumption. The main feature is uniform water heating throughout the volume. For heating, the copper heating element is responding with corrosion. In addition to stainless steel bac, the boiler has built an additional measure of corrosion protection - this is a magnesium anode of increased size.
The cost of the accumulative water heater for 80 liters from Timberk is a little bit bit - for it will have to lay out almost 20 thousand rubles. Reviews about the model are exceptionally positive painting.
Simple, reliable and not the most expensive - this is the way you can briefly characterize this model. The water heater accommodates 80 liters, heated water to a temperature of +75 degrees, and it is adjustable at its discretion. The heating time is 185 minutes (up to the maximum temperature mark). The design already contains two valves - reverse and safety. The omnipresent magnesium anode is responsible for protection against corrosion.
The water heater tank is made of conventional steel coated with an enamel coating - far from the most reliable option, but there were no special complaints from users. But it has copper tanes, characterized by increased reliability.The number of Tannes is 2 pcs, which provides more uniform heating. The maximum water pressure in the tank is 6 atmospheres. The device itself is made in a rectangular case rounded, and a somewhat "puzzle".
If you want to purchase an inexpensive water heater for 80 liters from a well-known manufacturer, we recommend to look at this model. Literally for 6.5-7 thousand rubles you get a boiler who will give you around the clock required amount hot water. The device is made in the traditional "barrel-shaped" case covered with white enamel. The inner tank is also covered with enamel, but already protective. Features and characteristics of the model:
- Simple mechanical control;
- Pressure in the tank - up to 8 atmospheres;
- Built-in mechanical thermometer;
- Power - 1.5 kW;
- Uzo included.
Also, the water heater is endowed with an integrated safety valve. The maximum water heating temperature is +75 degrees, 80 liters of water are heated for almost 4 hours.
We have another interesting water heater with a tank for 80 liters, made in a rounded rounded case covered with a traditional white enamel. A feature of the aggregate is the use of dry beans. They are more reliable, since the heater itself is isolated from the water with a metal tube. The power of the used Tan is 0.8 and 1.2 kW (summary 2 kW). Water heating time to maximum temperature (this is +75 degrees) is 184 minutes.
Despite the fairly decent cost, constituting almost 13 thousand rubles, the water heater is based on a steel tank with an enamel protective coating. But the steel itself is very durable, it is well opposed to corrosion. And helps her in this became the usual magnesium anode. The boiler is controlled by a mechanical control system and can be mounted both in the vertical and horizontal position.
This water heater is highly popular, it is often found on shop windows. Holding 80 liters of water, it heats it in about 3.5 hours. The unit of the unit is made of stainless steel, which indicates almost 100% resistance to corrosion. The power of the used Tan is 2 kW, it is possible to reduce it step up to 1.3 kW. Management here is an electronic, there is a display displaying the temperature achieved. On board, reverse and safety valves are already provided.
The water heater is designed for vertical mounting with lower eyeliner. It will become an optimal purchase for both home and apartments. It is easy to control, it is distinguished by a long service life, and in the reliability of its inner tank, which organizes 80 liters of tap water, can not be doubted - it will last long and without leaks. The cost of the model in the domestic market is approximately 13-13.5 thousand rubles.
We have a fairly advanced water heater, designed for all the same 80 liters of water. He possesses good technical characteristics, It is upset only the absence of a stainless steel tank - here it is made of conventional steel and covered with protective enamel. The magnesium anode is responsible for the resistance to corrosion.Interesting features of the model:
- The maximum heating temperature is +85 degrees - this is a noticeable higher indicator than in other water heaters;
- Dry TEN - it is distinguished by corrosion resistance and does not form a noticeable amount of scale. Its capacity is 1.8 kW;
- Built-in freezing protection - relevant for country housesused extremely rarely, for example, to accommodate on weekends or for rent;
Now there are so many houses (both private and multi-apartment) are made from aerated concrete. This technology has many undoubted advantages, for example, it is lightweight, breathable, warm. However, at first glance, it is not so durable, really can be cut to a regular saw. It is soft and easy to crumble! It scares it, for example, it is possible to hang (fasten) to such a wall something, say the boiler (in our water heater), I mean a cumulative, and not a flow version. After all, to take a shower normally, you need to take at least 50 liters, and will it endure the wall? Actually about this and there will be another article + video version at the end. So read-look ...
Water is becoming more expensive, therefore, in order to save on it, it is often profitable to hang a boiler. However, if on a brick wall, as well as on concrete (plates) you can hang without special fears, both materials are very durable. That is a fetal wall, to withstand this weight can not always, there are many cases in the network when it seems that even a heavy water heater in 30 - 50 liters fell, pulling out pieces of pieces! So what should I hang or not?
How much water heater weighs
Many mistakenly think that the water heater weighs "at par". That is, if you took, let's say on 50 liters, then the total weight is about 50 kilograms! But it is extremely not true, the weight of the water heater itself is also not small. I will cite exemplary weights on items:
- 30 liters on average only the water heater itself will weigh around 13 - 15kg
- 50l - 17 - 20 kilograms
- 80l - 22 - 24kg
- 100l - 24 - 26 kg
- 120l - 26 - 30kg
- 150l - about 35kg
- 200l - about 57kg
- 300l - about 74kg
Of course, much depends on the manufacturer - which thickness it used (as well as what material is the usual steel or stainless), how much I put the insulation, how much weighs the plastic tank, how much electronic filling. But on average, the weight of the water heater is just such.
That is, if we bring a small result, it turns out - a boiler for 50 liters (20kg) + water in it another 50 kg, so - the total weight will be around 70kg .
We disassemble aerated concrete
Despite the seemingly softness of the aerated concrete material (it can really cut with a hacksaw), it can withstand sufficiently large loads. However, not all manufacturers make the same material. What I mean - before, to calculate what weight can withstand the wall, you need to know the density of your aerated concrete. It is also different, from this will dependelable the load.
The minimum density that I personally saw is 300 kg / m3. Such blocks are mainly taken for private houses and small to two floors of buildings.
The average density is 400 kg / m3, with such blocks you can build houses up to three floors without any gain.
The maximum density is 500 kg / m3, such a material can be used to 4 floors, without any gain. That is, the blocks themselves are made as bearing walls.
Of course, it is possible to have a density even higher, but I personally did not have to face it.
The guys have two types of load, it is the so-called - If it turns rude, it is if you hang a heater to the ceiling, screw the bolts into the ceiling, the boiler will try to snatch them.
This is when the bolts are twisted into the wall, and the boiler tries to break them or cut them. Length is not so important here (although it should be sufficient), the density of the material is important here, as well as the thickness of the fasteners - bolts.
Often boilers hang on capital, street or access walls. They have a thickness of at least 25 cm (250mm), and street walls can vary from 400 to 500 mm (almost half meter). On thin walls, from which partitions are made, hang a boiler - not recommended especially large litter! Walls for partitions are often the thick of only 10 cm, they cannot withstand a lot of weight, and they really collapse.
About the load on the slice and density, I will take walls with a thickness of 25 cm, as well as one bolt with a diameter of 8mm:
300 kg / m3 - withstands 50 kg
400 kg / m3 - about 70 kg
500 kg / m3 - about 90 kg
I have long been looking for such information on various sites of manufacturers, it may be not quite accurate, but here I pointed out with a margin. On one resource of the manufacturer, it was said - that the density of 300 kg / m3, if it should be screwed up a bolt of 8 mm diameters and a length of 100mm, can withstand about 100 kg of load on the cut!
That is, if you hang a water heater of 50 liters (and how we counted about 70 kg from above), usually hang on 2 or 4 bolts, then even a wall with a density of 300 kg / m3 will end it easy! Indeed, in the version with 2 bolts, the cutting load on the slice will be about 100 kg, and with 4 bolts 200 kg! If the density takes at 400 - 500 kg / m3, then the redundant load is much more, so the wall in 500 (4 bolts) - withstands up to 400kg.
My version
I hung on a carriage wall in 50 cm, a density of 400 - 500 kg / m3, the manufacturer indicates on its website. The truth is a boiler for 120 liters, and also weighs about 25kg himself, that is, you need to withstand the total weight of 145 - 150kg. True, 4 bolts are used for fastening, large weights are already from 80kg, 4 fasteners are used!
What I bought, a special dowel nails on a gas concrete, they look like special screws (they have protruding parts on the sides). The hole is drilled and it is clogged there, and the side parts are cut down "slots" in aerated concrete, it allows the dubel to sit quite firmly.
What was done yet - the dowel bought with a size of 10 x 70mm (simply was not more than size), and bought a "plumbing bolts" with large washers, 8 x 100mm. Why did the bolt take longer? I read on one forum - that such a combination gives even greater strength of the mount, the bolt passes a dowel through, and at the end, when he cuts through it, as if pressed the tail parts of the plastic even more strongly!
Actually removed the sizes from the water heater, drilled 4 holes 10 x 130 mm, scored a dowel there and screwed down the "plumbing bolts". After hung the boiler and the empty fastened it on the wall, very firmly!
Next, we turn on the water and observe, of course, worried a little, but everything is fine. On 4 bolts, the boiler is a common weight of 145 - 150kg, keeps perfectly, weighs here for 4 months, so you can hang on aerated concrete! The main thing is to fit with the mind! You can not hang on the walls of a 10 cm aerated concrete (interroom), water heaters are more than 30kg - it is dangerous!
Now video version of the article, look.
At this end, I think my article was useful to you, read our construction site.
Currently in stores household appliances Available a large assortment water heaters. You can purchase budget models that are made in classical design. They have round shapewhich is why it seems sufficiently bulky. To install such devices you need a lot of space. And what to do those who have very little apartments? This manufacturers also took care of this, producing (80 liters) vertical flat. As a rule, its depth is about 25 cm. Therefore, it is possible to place it in the bathroom, toilet and even in the kitchen.
Thanks to the beautiful design design, such devices will perfectly fit into the interior. The weight of flat boilers is about 30 kg. If you use special attachments, you can install them on any walls (concrete, gypsum, wooden). For example, Ariston ABS VLS QH 80. Its dimensions: 1090 × 49 × 27 cm. Without water, it weighs 28 kg. The device is collected in Russia. Equipped with two tanks (incoming and outgoing). Heating elements three. Maximum temperature - 80 ° C. Made in silver color, there is a gray shade finish (from above and below). Control panel - electronic.
Equipment of flat water heaters
The water heater is accumulative (80 liters) vertical flat consists almost from the same details as classical models:
- Housing.
- Water tanks. In flat models there are two of them.
- Terkesolation.Located between tanks and hull. Responsible for long-term preservation of water temperature.
- Heating element. The amount of Tan can vary from one to three.
- Control Panel. It is located either on the front side or at the bottom of the water heater.
- Thermostat and thermometer. The regulator allows you to exhibit optimum temperature. You can change it at any time. The thermostat is a fuse from overheating, as well as it turns off the operation of the TEN, if the tank is empty. The thermometer shows the water temperature at the moment.
- Tires. They provide feed cold water And the output is already heated.
disadvantages
Water heater accumulative (80 liters) vertical flat even the most expensive has some drawbacks. Let's look at them:
- Teplopotieri. Due to the specific form, the thermal insulation layer is quite thin. This leads to a rapid cooling of water and, as a result, to an increase in electricity consumption.
- Jumpers between the inner tanks. Most often in places where welded seams are, leaks happen. This leads to the formation of rust. Unfortunately, even stainless containers quickly fail.
- High price. In comparison with classic models, flat stand several thousand more. Also worth paying attention to: the purchase of spare parts and repairs will also be expensive.
Dignity
Water heater accumulative (80 liters) vertical flat, despite some minuses, there are many advantages:
Water heaters accumulative: firms
Currently, the most popular are the following manufacturers:
- Electrolux - Swedish brand. He is the world leader in the production of household appliances. Products are distinguished by high quality, excellent equipment and assembly. Studying statistics, we can say that breakdowns in flat boilers Electrolux are extremely rare. The percentage of the risk of the complete failure of the device is a meager. The service life is at least 10 years. For example, the EWH 80 Royal model is popular. Tan power - 2 kW. Convenient control panel. There is temperature adjustment and thermometer.
- ARISTON. - Italian brand. The company has been engaged in the production of boilers for 50 years. Buyers respond about products quite well. There are cases of breakdowns, but they are easily eliminated. The water heater accumulative Ariston works without any problems about 6 years.
- Thermex. - The company, which for about 65 years has been engaged only by the production of water heaters. The buyer should know that the instrument assembly is automatically implemented. Manual human labor is not used. This significantly reduces the cost of production and improves quality. The manufacturer claims that for 7 years the water heater will work without breakdowns. The popular model is Flat RZB 80-F. The case is decorated in beautiful design. For water heating, it will take about 2 hours. Tank material - stainless steel.
Cost
We continue to consider the price for many is a significant criterion. For example, the Swedish quality will have to pay considerable money. Flat Electrolux boilers for 80 liters for sale on average for 12000-15000 rubles. The cost of ARISTON water heaters is slightly lower. ABS VLS QH 80 model can be purchased for 10,000-11,000 rubles. As for the products of THERMEX, the price of 80 liters in a capacity of 80 liters starts from 9000 rubles.
Many consumers today are thinking about how to choose a water heater. Such equipment can be classified by several features. Among the sale, accumulative, flow, and even flow-accumulative models are presented. All of them look similar to each other may have a cylindrical or rectangular shape.
As the main external difference is only the size. Flowing water heaters have compact dimensions, while cumulative, on the contrary, is quite a lot of space. If you decide to choose the last type of device, you should consider the water heaters of accumulative 80 liters vertical flat. Some of them will be presented in the article.
Overview Models Ariston ABS VLS EVO PW 80
This electric water heater has a flat shape, its value is 13090 rubles. The model can be used in the house, apartment or at the cottage for hot water supply. The unit has a tank for 80 liters, which has the basis of steel and has a silver coating.
The device is made of plastic and attached to the wall. On the front panel there is an electronic thermometer with which you can follow the temperature. This water heater accumulative on 80 liters vertical flat "ariston" provides the possibility of accelerated heating and has a convenient option for protection against inclusion without water. Among other characteristics, the power should be highlighted, which is 2.5 kW.
Water heating can reach 80 ° C. Device dimensions - 1066 x 506 x 275 mm. Includes there is a network plug. Weighs the unit 27 kg. The limit pressure of the water is 8 bar. Control - electronic. It should be borne in mind that this equipment has no remote control. However, there is a display and the function of accelerated heating.
When consumers acquire a water heater accumulative to 80 liters vertical flat, they often pay attention to the presence of a filter and self-diagnostic system. This model does not have any. Up to 45 ° C equipment heats up water in 186 minutes. The design has wet fans.
Reviews of the model
If you still do not know what a device for heating water to choose, you can consider the water heater model from the Ariston manufacturer. According to consumers, it has many advantages, among them should be highlighted:
- durable plastic based on hull;
- attractive design design;
- restrained surface colors;
- the presence of two internal tanks;
- the possibility of connecting cold water to the left and below, as for hot water.
Consumers also like the safety valve that comes in the kit. This indicates that it is not necessary to spend money in addition when purchasing the device described. The advantage can also be called the distance between the entrance and the yield of cold and hot water, which is 408 mm.
Electrolux EWH 80 Water Heater Overview 80
This equipment model will cost consumers at 12390 rubles. It is a flat water heater for 80 liters, which has an internal tank made of stainless steel. This material is durable and resistant to corrosion. It has excellent protection from dry heating and overheating, as well as overpressure. All this suggests that the exploitation of the water heater of the accumulative to 80 liters of vertical flat "Electrolux" will be most secure as possible.
The power of this equipment is 2 kW. Installation is carried out on the wall. Included there is a plug, which is very convenient. Weigh the device 19.8 kg. The maximum water pressure is 6 bar. Management is mechanical. Includes there is no magnesium anode, but there is a safety valve.
Attention should be paid to the presence of display and accelerated heating. For many consumers, decisive when choosing is the absence of a remote control. The eyeliner is on the side and below. Up to 45 ° C water will be heated in 192 minutes. Complete two tan. The device size is 557 x 865 x 336 mm. The maximum heating temperature is 75 ° C.
Consumer reviews
Buyers like that the inner tank made of stainless steel has a high chromium and nickel content, which are anticorrosive alloying elements. Owners of apartments and houses note that steel with the above-mentioned characteristics is distinguished by corrosion resistance and processing technological. All this indicates the high reliability of the work of the unit and its durability.
By purchasing a water heater accumulative for 80 liters vertical flat, the reviews are recommended to read. Of these, you can understand that in the manufacture of internal tanks, automatic argon welding is used, which avoids defects. The latter may be associated with manual production. This indicates flawless quality of seams and corrosion resistance during operation.
Water heater overview for 80 liters Polaris Ultra IMF-80 V
By purchasing the above-mentioned model, you become the owner of the equipment for 17,000 rubles. This water heater has a security system, thanks to which the equipment cannot encounter overheating problem. The accumulative tank has an inner coating and is made of stainless steel.
This water heater "Polaris" accumulative for 80 liters vertical flat has white, so you can enter the equipment to any room. In the case material lies metal. The eyeliner is available below. Control - electronic. Water may have a maximum pressure of 7 bar. The water heating temperature is 75 ° C. The rated power of this water heater accumulative to 80 liters of vertical flat is 2.5 kW. Included wet tan. Additional comfort is provided by the power indication. The manufacturer also took care of the heating indication function. But there is no crane in the kit, like a shower nozzle, as well as a shower hose.
Conclusion
The water heater is accumulating for 80 liters vertical flat can be an excellent solution for the family. With this equipment you can eliminate the problems with the supply of hot water. If you still can't decide which manufacturer to prefer, it is worth compare the cost of devices, as well as their completeness and functions.
