Any sports inventory requires proper care and periodic updates. If the skates fumbled, and you stopped enjoying high-quality ice riding ... It's time to give the blades to the former sharpness. But how is the sharpening skates?

There are two ways to drain the skates: with a frill and without a refuge. It is also called a "groove". It is necessary for more "correct" and comfortable skating. What is the groove? This is a method of sharpening directly on the skate blades. The area of \u200b\u200bcontact of the blade of the ice skate becomes less than that of a flat blade of the blade, thus the pressure is larger, it means that the temperature at the point of contact increases with a stable volume. As a result, the water film is better and faster, in which slides the blade of the skates.

The blade with a flat sharpening of the blade resembles ordinary skis ... If the legs are located strictly vertically, the skates really stop clinging the ice.

You have two options:

1. to give the master and he will perform all the painstaking work for money using the machine for sharpening skates.
2. try yourself to sharpen skates at home.

In the first case, if you decide to attribute skates to a professional, you should not have any problems. But do not forget to clarify the specialist - what kind of sharpening it will use - with a "groove" or without.

If you do not want to spend money on the work of a professional and prefer to do everything yourself, you may have certain difficulties. If you have never practiced sharpening skates, is there sure that you do not spoil the blades? Many believe that skates are in principle impossible to spoil, while few people even realize understand - how to sharpen skates.

At home, the method of sharpening with a groove is most often used. This requires an ordinary emery, as well as a guide plate and grinding wheel, which is used to finish the groove in sufficiently blocked blades. A round file manually creates the correct shape of the groove (the depth is not greater than 0.5 mm), the edges of the blade are reached. The main thing is to make sure that the groove is not littered on the side. Post across the grooves flat smooth surface that would be perpendicular to the blade. After that, carefully remove Bru's burrs. Skates are sharpened. You can ride!

Sharpening hockey and curly skates differ. For example: blades in curly skates accurately with a groove, they have radius from 10 mm and up to 15 mm (called "deep god"). And at hockey skates, the so-called "petty yellow" with a radius is maximum up to 7 mm.

For homework, small-sized mobile machines with a stable design and manual control are created. Thanks to small dimensions and weight, they can be applied at away competitions.

In configuration with the machine, as a rule, a special vacuum cleaner is provided, designed to remove ceramic and metal dust. The delivery also includes a grinding disk. Prices for such aggregates differ - it all depends on the manufacturer's company.

However, many masters prefer to use universal grinding machines for hockey and curly skates. Such devices create a flat surface, but along the axis of the blade, the groove is pulled out.

The answer to the question "How to sharpen skates?" It will depend on what is more convenient for you. If you do not want to take on technical duties, it is better to give skates to professionals. However, do not hurry to sharpen skates at home without experience. If you intend to achieve independence, it is better to take a few lessons from the pros and only then purchase a grinding machine and care for the skates. Otherwise, you risk spoiling blades at least one pair.

You will also be interested in articles on this topic:

3 thoughts on "sharpening skates at home and in a professional"

Already in almost every club NHL and not only increasing application find a portable device for sharpening skates, which not only sharpens and rules the blades of skates, but also significantly extends their "life", because It is much less likely to have a sharpening on the machine that removes the whole layer of the blade. The next plus of EA is that it is possible to sharpen skates without removing them within a few seconds, which is very important during the match. In addition, it may be an excellent solution to the problem of absence near the sharpening skates.

But where would such machines for quick sharpening get the rest of lovers to ride?

The author of the article pushed something with the radius of the groove. Actually, the more radius of the groove, the less deep groove it turns out. The radius of 15mm gives a pretty deep groove, especially if we consider that the figure skates have a thickest blade. Therefore, the same radius of the end of the grinding stone gives more sharp edges. Do not believe? Draw on a sheet of paper on a large scale drawing on the conjugate surfaces stone-blade and everything will become clear! And for mid-weight hockey players and normal ice rigidity, the optimal radius of the groove lies between 17 to 24 mm. Here, of course, the blade profile is of great importance, the profile of the blade is more risk profile requires a smaller groove and vice versa. Believe me to a person who has already been sharpening the skates and is still trying to improve his knowledge, wandered on your page in search of these knowledge, but in addition to the common phrases, I did not find anything for myself. Sincerely, Alexander.

How to put the skates at home - two simple ways

Skating - one of the most popular sports. However, over time, the comfort of driving can significantly decrease. This is due to the loss of the edge of the initial form. The only way out is to make it sharpening. If there is no desire (or opportunities) to contact a specialized service - this work can be made independently.

The main mistake of newbies are attempts to make the blade as sharp. This will lead to a loss of sustainability and as a result - possible injuries. If you carefully look at the end of the blade, you can see the groove. It actually forms 2 planes of contact with ice-coated. Under the action of friction force ice melts, forming a water layer. It is she who contributes to a better slip.

Kid blades configuration

The basic rules of sharpening skates at home are as follows.

1. After its execution, the configuration of the blade should be as close as possible to the original factory.
2. The absence of a burr or uneven thickness of each blade plane.
3. Availability of appropriate tools.

For reference - the depth of the groove for figure skating is about 5-6 mm. This contributes to the best maneuverability, but affects stability. The deeper the flow - the easier it is easier to stand on skates. For hockey models, this parameter is usually 20 mm. Speeds have the deepest groove - up to 45 mm.

Sharpening blades reduced the original size of the gutter. To do this, you can apply a manual or electrical tool. In case of an infrequent use of skates, you can limit the simple supfil installed on the wooden bar. But if skating often occurs or in the house there are several lovers of this winter sport - it is recommended to use the power tool.

The main tools will need vice, the feet (round) appropriate diameter and wooden bar. The latter has a p-shaped form, in the groove of which is fastened.

Pluging a horse in vice, you need to perform the following steps.

1. The dump truck is installed on the front of the blade and the reverse movement outlines the circuits of the groove. If the sharpening has not been performed for a long time, then the absence of a gutter is possible.
2. By chalifting the depth line, compare the dimensions of future ribs. They must be completely the same in thickness.
3. Applying great efforts, the recess is performed until the desired value is reached.

The final stage is the elimination of the burr. This can be done using a fine-grained file or flat noodle.

A grinding wheel is attached to the enshrined "grinder" or drill, the thickness of which should be less than the width of the groove by 0.5-1 mm. The cover should be fixed with clamps at the steel corner. Attention - its height should be adjusted.

Sharpening with power tools

Then manually outlines the outline contours. Sharpening is performed from the front of the blade. Thus, even if there are unnoticed burrs, they will not greatly affect the quality of slip.

How to put ice skates at home

How to enjoy riding in winter ice skating? How to keep track of the condition of the blades? How to sharpen skates at home? You will receive answers to these questions, having studied the offered step-by-step instructions with photos.

• Content:
• 1 flat sharpening skates
• 2 sharpening blades with a groove at home

The blade of the skate with a groove allows you to correctly and efficiently produce skating by reducing the area of \u200b\u200bcontact of the blade and ice. Flat sharpening is suitable for novice athletes.