Sniper tactics
Today in most armies, there are two main concepts of sniping:
1. A sniper pair or a single shooter works in the "free hunt" mode, i.e. Their main task is to destroy enemy manpower on the front line and in the immediate rear.
2. A sniper-reconnaissance patrol, consisting of four to eight riflemen and two observers, fetters the enemy's actions in its zone of responsibility and collects information about the organization of the enemy's forward edge. If necessary, such a group can be reinforced with a single machine gun or grenade launcher.
To carry out the combat missions assigned to him, the sniper must be located in a separate, carefully disguised position. When a target appears, the shooter must quickly assess its value (i.e. determine whether it is worth shooting at this object at all), wait for the moment and hit the target with the first shot. In order to produce the greatest psychological effect, it is advisable to hit targets that are as far away from the front line as possible: a well-aimed "out of nowhere" shot that hits a person who felt completely safe, plunges other enemy soldiers into a state of shock and stupor.
Sniper operations are most effective in positional battles. In these conditions, three main forms of combat work are applicable:
1. Sniper ( sniper group) is located among its positions and does not allow the enemy to move freely, conduct observation and reconnaissance;
2. The sniper (sniper group) conduct a "free hunt" away from their positions; the main task - the destruction of high-ranking command, the creation of nervousness and panic in the immediate rear of the enemy (ie "sniper terror");
3. "Group hunting", i.e. the work of a group of snipers of four to six people; tasks - disabling key objects when repelling enemy attacks, ensuring secrecy when moving their troops, simulating an increase in combat activity in a given sector of the front. In some situations, it is advisable to use snipers on a company or battalion scale centrally. This allows you to strengthen fire resistance to the enemy in the main battle area.
When working in pairs, one of the snipers conducts observation, target designation and reconnaissance (spotter or observer), and the other - fire (fighter). After 20-30 minutes, snipers can switch roles, because long observation dulls the acuity environment... When repelling attacks in cases where the area of responsibility of the sniper group appears a large number of targets, and in a sudden collision with the enemy, both snipers are firing at the same time.
Sniper groups, including 4-6 shooters and the calculation of a single machine gun (type PKM), can be used to reach the flank and rear of the enemy and inflict a sudden fire defeat on him.
It is extremely important not only the work of the sniper himself, but also of his partner - the spotter. It solves the following tasks: transfers and prepares optical surveillance equipment for operation, determines the route and methods of movement, provides fire cover for the sniper using an assault rifle with an under-barrel grenade launcher, disguises and eliminates traces on the route of movement, helps the sniper when arranging a shooting position, monitors the terrain and draws up a report on the operation, conducts observation of the battlefield and target designation, maintains radio communications, uses sabotage equipment ( antipersonnel mines and smoke bombs).
Most productive tactical technique sniping is a long daytime ambush. It is carried out at predetermined positions in the area of the most probable appearance of targets. The main task of an ambush is to restrict the movement of the enemy, demoralize him and collect intelligence information.
All available intelligence information should be used when choosing an ambush site. In cases of enemy activity in this area, snipers must be accompanied by a cover group. Before going into an ambush, a sniper pair must agree on the coordinates of their "prone", the time and approximate routes of approach and departure, passwords, radio frequencies and call signs, forms of fire support.
An ambush is usually carried out at night, so that by the morning it is already in place. During the transition, complete secrecy must be observed. At the ambush site, reconnaissance of the area is carried out, the position is equipped and camouflaged. All this is done after dark, all work must be completed at least an hour before dawn, when the enemy's night vision devices will start working. With the onset of day, the sniper pair begins to observe and search for targets. As a rule, in the early morning and at dusk, soldiers lose their vigilance and may expose themselves to a shot. In the course of observation, the areas of probable appearance of targets are determined, the speed and direction of the wind are constantly assessed, landmarks and the distance to them are outlined. At the same time, throughout the day, snipers must observe complete immobility and strict camouflage.
When targets appear, the group must quickly assess their importance and determine whether to open fire on them. Having opened fire, the sniper in many cases unmasks his "prone", so you need to shoot only at the most important and clearly visible targets. Aiming at the target is usually carried out by both snipers: in the case of a miss, the observer will either also open fire, or will be able to correct the shooting of his first number.
The decision on whether to stay in position further is made by the senior sniper pair after the shooting. If nothing suspicious happens at the enemy's positions after the shot, then the group can remain in position until dark. Leaving the position is carried out only at night, as imperceptibly as possible. In this case, the ambush site is given its original appearance, all traces of "lying" are carefully eliminated in order to reuse it if necessary (although this is done only in exceptional cases). In some situations, a surprise mine may be placed on the abandoned position.
Special mention should be made of the tactics of snipers serving at checkpoints. When organizing a checkpoint, it must necessarily include a group of snipers performing specific tasks to ensure the safe operation of the post. Therefore, a position for observation and fire, which would provide the maximum sector of view and shelling, secrecy from enemy observation, should be chosen not only on the territory of the checkpoint, but also behind it. The specifics of the checkpoint's work does not guarantee maximum secrecy, so the sniper must remain constant vigilance so as not to betray himself. To do this, he must observe the following precautions: be always prepared for the position to be monitored; do not make unnecessary movements; do not use observation devices without protection from direct sunlight on the lenses; maintain a natural position; take a position or make a change in secret.
A circular defense is organized at each checkpoint. Therefore, snipers equip the main positions in the center of the defense area, but they are not used in day-to-day work. Particular attention is paid to the interaction of snipers. If there are several checkpoints in one direction, then snipers will definitely organize interaction with them.
Sniper tactics in special operations
When taking hostages in buildings or residential buildings, the first action of the special anti-terrorist unit is to block the scene of the crime. In this case, snipers are directed to the most dangerous directions, i.e. places where criminals can break through or try to sneak away through attics and rooftops. After studying the situation: the territory adjacent to the object, the location of the premises inside the object, taking into account their rearrangements, communications (garbage chute, heating main), and determining the location of the criminals, snipers take up firing positions that allow them to monitor the actions of criminals without revealing themselves.
If this is a multi-storey building and the windows of the apartment or office where the criminals are located face to one side, then the snipers take a position opposite, but not below the floor where the criminals are. The position is chosen so that each room is under the crossfire: this allows you to view the entire apartment. If the windows are tightly curtained, you need to try to find the gaps between the curtains and observe through them.
The position should be taken in the back of the room, the light should not be turned on. If the curtains are light and you can see through them, then they do not need to be touched. In attics, positions are also looked for in the depths of the room, but here you need to make sure that the light does not fall through the slits on the silhouette of the sniper, since this gives it away when moving. On the roof, the sniper takes positions behind exhaust pipes, roof ridges, or makes neat holes in the roofs down the length, allowing observation and fire.
Snipers constantly keep in touch with the leader of the operation and among themselves: if one detects a criminal, the other sniper must also try to find him and determine from which position it is more convenient to hit him.
A special operation when a terrorist hijacks an aircraft is the most difficult. Aircraft have a high degree of danger when they are struck by fire, therefore the use of standard sniper rifles is limited, since when a bullet hits a target, the bullet may not remain in the criminal's body, damaging the aircraft, so the sniper must know the design of the aircraft, helicopter and the location of fuel in them. tanks and pipelines. When shooting at aircraft you cannot use armor-piercing incendiary, with a steel core, tracer bullets.
The sniper opens fire only when he is fully confident in hitting the target. Such evil as "air terrorism" is now widespread. Therefore, special forces should devote more time to training in this direction. All airports and air terminals must be equipped so that when a captured aircraft lands, special forces can invisibly reach it. If there are no underground communications, then you need to use all possible options for covert approaches to the aircraft. To do this, you must have a specially equipped fuel tanker for the assault team and the sniper.
At the beginning of the assault, the sniper takes a position behind the wheel stands of the aircraft, covering the assault group when entering the aircraft, and then controls the actions of the group inside the cabin. He takes a position in the tail section and, using a 9-mm cartridge (such as "Cypress", "Kedr", PP-93, etc.) with a target designator and a silencer, strikes armed terrorists who prevent the assault.
Observation posts or towers are installed on the roofs and upper floors of the air terminals, where a sniper can be located. Posts and towers should be located so that during observation it was possible to view the aircraft from both sides along the hull and from the side of the cockpit. One sniper should be with the assault group, covering it from the rear. The sniper's task is mainly to gather information and coordinate the actions of the entire group.
When eliminating riots organized with the aim of seizing power, the primary task of snipers is to study the object of protection, identify the leaders of the group and the area adjacent to the object.
A diagram of the area adjacent to the object and buildings located near it is drawn up, where the sectors of fire by snipers, their main and reserve positions are indicated. The locations of the most possible location of enemy snipers, command posts, and the direction of a possible assault are also plotted on the diagram. In the facility itself, when there is a threat of assault, firing positions are equipped at all levels of the building, taking into account camouflage, if necessary, loopholes are made through the walls of the building and camouflaged. Snipers work separately, keeping in touch with each other. At the same time, observation is carried out, the main forces of the enemy, their strength, weapons are identified, as well as the movement of vehicles and people is controlled, leaders are identified and photographs and filming of what is happening are provided.
During the assault, the arrows first of all destroy the commanders of the assault groups, leaders, snipers, grenade launchers, machine-gun crews.
In preparation for the defense of an object by a sniper, the following measures are taken:
- an accurate measurement of the entire fire area is made with a mark on the diagram and certain signs are placed on buildings, pavements, etc.;
- all entrances to the attics and basements of neighboring buildings are tightly clogged and filled up, if necessary, mines are mined or signal mines are placed, if there is an assumption that they will be used as firing points;
- in the very object of defense, the sniper personally checks all the alleged positions and marks the locations of the loopholes;
- when equipping a firing position, all objects that reflect light are removed, chandeliers and electric bulbs, if they are located above the sniper, are removed.
Disguise and surveillance
Enough has been written about the laws and techniques of camouflage and observation. Nevertheless, once again about the most important thing. You need to observe very carefully, not missing any trifles. Anything that may turn out to be suspicious should be carefully examined and checked in the sector of responsibility. However, this should be done very carefully, without giving away your location.
To disguise means to blend in with the terrain. In the middle of the meadow, the sniper should be grass, in the mountains - a stone, in a swamp - a hummock. Camouflage should not stand out in any way from the surrounding background. At the same time, it is imperative to take into account the duration of the upcoming work - for example, green leaves on cut branches by the end of a hot day will fade and will unmask the "lying", and it will be very difficult to replace them without giving themselves away with movement.
The reflections from the lens of the optics - sight and observation devices - are very insidious on a sunny day. This moment killed many snipers - remember the fate of Major Konings. In general, it is best to observe with a periscope.
In the absence of wind, smoke from a shot can give out the position, so if possible try to shoot from a short distance because of rare bushes or because of a building, tree, or boulder. Among other things, a bullet, flying past such an obstacle, makes a sound, as if coming from a place to the side of the shooter.
The enemy, especially in trench warfare, knows the terrain in front of him very well. Therefore, each new bump, crumpled grass, freshly dug earth will inevitably arouse his suspicion and will cost the sniper his life.
At dusk and at night, additional unmasking factors are the flash from the shot and the reflection on the face from the eyepiece of the night sight. Also, do not use the illumination of the PSO telescopic sight reticle: at dusk, from the side of the lens, the light bulb can be seen a hundred meters away.
Even being in your rear, you don't need to show that you belong to a sniper group: you shouldn't show off in front of everyone with a sniper rifle and equipment, since the enemy is watching everything that happens in your camp. The sniper is the worst enemy for him, to destroy him has always been and will be the number one task for him.
Another excerpt from Zaitsev's notes: “Every entry to a position must be provided with strict camouflage. A sniper who cannot observe in disguise is no longer a sniper, but simply a target for the enemy. I went to the front edge, disguise myself, lie down like a stone and observe, study the area, draw up a card, put special signs on it. If, in the process of observing, he showed himself with some careless movement of his head, opened himself to the enemy and did not have time to hide, remember, you made a mistake, for your mistake you will only get a bullet in your head. This is the life of a sniper. "
Weapons and applied ballistics
In connection with the tasks assigned to the arrow, the modern sniper rifle should ensure the defeat of a live target at ranges of up to 900 meters, with a high probability (80%) of hitting a belt target at distances of up to 600 meters with the first shot and up to 400 meters into a chest target. It is desirable that in addition to a general-purpose sniper rifle (for example, SVD), snipers have at their disposal a combat rifle with an accuracy close to that of a sporting weapon (for example, SV-98). Such a rifle with a special live cartridge, while ensuring high accuracy, should be designed to solve special problems. In cases when shooting is carried out at short distances (150-200 meters), especially in urban conditions, it is advisable to use silent sniper rifles (such as VSS and VSK-94). Sniper "noisemakers" are especially good in that they allow the "hunter" to leave the position unnoticed after the destruction of the enemy target. However, the short range of aimed fire severely limits their use. The range of guaranteed destruction of the head figure (the most common type of target for a sniper) from both rifles is 100-150 meters. That is, you need to approach the enemy's position exactly at this distance, and this is far from always possible. At the same close range, small-bore rifles with an optical sight are quite suitable.
The SVD, with all its advantages, does not have the highest accuracy. Therefore, during counter-sniper operations, it is preferable to use high-quality weapons (MC-116, SV-98) and ammunition - a must! - sniper or target. If you are forced to use only SVD, try to put on it a sight with a higher magnification - for example, PSP-1 or Hyperon - this will increase the effectiveness of fire and the likelihood of hitting the target from the first shot.
When designing a sniper operation, you need to carefully consider the capabilities of your weapon and ammunition. In particular, the dispersion diameter (i.e., the distance between the centers of the holes farthest from the midpoint of hitting) for a cartridge with an LPS bullet at a distance of 300 meters is approximately 32 cm, and for a sniper cartridge - 16-20 cm. With the dimensions of a standard head target 20x30 cm this difference plays an important role. Look at the table and compare with the average sizes of the main goals: head - 25x30 cm, chest figure - 50x50 cm, waist figure - 100x50 cm, height figure - 170x50 cm.
The effectiveness of the OSV-96 large-caliber rifle is a controversial issue, since special 12.7-mm sniper cartridges are produced in small batches, and the dispersion of conventional machine-gun cartridges of this caliber is too great for sniper shooting. However, when processing stationary sniper positions (pillboxes, bunkers, reinforced with armored sculpt models), a large-caliber rifle can be very useful. Even during the Second World War, Soviet snipers used 14.5-mm anti-tank rifles to hit protected targets and fire at embrasures.
It must be remembered that the rifle must always be aimed, then there is no need to doubt the accuracy of your weapon. It is required to regularly check the zeroing of your weapon at the main effective fire ranges, even if no one is shooting from the rifle: it happens that the aiming is also lost during the storage of the weapon. Zeroing is carried out only with the type of cartridges that will continue to be used: different types of bullets have different ballistics, and therefore, different flight paths.
It is necessary to carefully study the table of average elevations of trajectories over the aiming line and learn it by heart. In a combat situation, always use this particular table, especially when transferring fire from one target to another and when firing without rearranging the remote handwheel (using the "direct shot" method). For convenient use in a combat situation, such a table is glued to the butt of a weapon or sewn onto the left sleeve of outerwear.
Always wipe the barrel and chamber dry before entering an operation. If there is oil or moisture in the barrel, then the bullets will go higher, and when fired there will be smoke and a bright flash - this unmasks the position.
In heavy rain and fog, the bullets also go higher, so you need to move the aiming point down.
When working on particularly important targets, it is imperative to remember that the optimal sniper fire mode is one shot every two minutes, because the barrel should not heat up more than 45 degrees. If during the battle you have to conduct intense fire, it is worth considering that when the barrel warms up, the bullets will go lower.
If a bolt-action rifle is used, then when unloading, you must not send the bolt back too hard: this loosens the bolt and quickly wears out the larva. After firing, if there is no need to continue firing, leave the bolt open; this will keep the powder gases from sweating in the barrel and allow the barrel to cool faster.
To prevent the rifle barrel from glare in the sun and less heat in hot weather, it is wrapped in shaggy camouflage tape, a piece of KZS mask net or ordinary cloth tape. Among other things, this will protect the barrel from accidental impacts.
It is necessary to regularly check the strength of the fastening of the optical sight: whether there is lateral rolling, whether the handwheels rotate too freely. The quality of the adjustment of the aiming mechanism and the fastening of the drums is checked as follows: they direct the central square (the tip of the hemp) to some landmark and, alternately pressing the drums, follow the reticle of the sight. If the square shifts when you press the drums, it means that the sighting mechanism has large gaps and the reticle will inevitably shift with each shot.
Some scopes have some propeller free play. To determine it, the sight bracket is firmly fixed (for example, in a vice), the central square is brought to some point and the handwheel is turned several divisions to the side and back. If there is a free movement of the screws in the sight, then the square will not coincide with the initial position, without reaching it. In order to compensate for the free movement of the screws, it is necessary to end all turns of the handwheels in the same direction, for example, clockwise. Then, if it is necessary to turn the handwheel counterclockwise, then shift it two or three divisions further, and then, returning to the desired risk, finally set the sight by rotating clockwise.
It is always necessary to make the handling of the weapon as convenient as possible: the rubber butt pad from the GP-25 can be hung on the stock, and the folding bipod from the RPG-7 can be attached to the forearm, if desired. An ordinary rubber band from the expander, with a double sliding loop draped over the trunk, and tied with its ends to any vertical object (tree trunk, pillar, etc.), will allow you not to load your hands with the weight of the weapon in ambush.
The rifle barrel must be protected from dirt, dust and other foreign objects. If you have to work in dusty conditions (for example, in the steppe or in the mountains), then a regular condom is put on the trunk; after the first shot, it will burn without interfering with the flight of the bullet.
Weapons require careful attitude to themselves, so you need to clean them regularly, and most importantly - do not let anyone shoot them.
Sometimes the situation can change quickly, targets can appear over a wide area with a spread in range and quickly disappear. In such conditions, it is simply unrealistic to determine the distances every time, and even more so to set the sight along them. In anticipation of such a situation (as a rule, it occurs when the enemy attacks), it is necessary to aim the rifle at the maximum range in its zone of responsibility (for example, 400 meters), remember a noticeable landmark in the area of this range and navigate along it in further shooting. Now you can estimate by eye how much the target is farther or closer to the reference point in the amount of "swing" along the vertical of the aiming point. To do this, you need to have a very good idea of the trajectory of the bullet at the distance at which the rifle was aimed. It is quite simple to check a rifle fight in the field: to outline a landmark and make a series of shots at it - the deflection of the bullets is determined by ricochets. However, it should be borne in mind that one should not get carried away with such non-standard zeroing: it is used only in the most urgent cases, when there is a need to hit the target from the first shot. Zeroing should be masked by the noise of the battle and carried out from reserve positions.
For high-speed shooting at short distances (up to 300 meters), as a rule, a direct shot is used, i.e. a shot in which the trajectory of the bullet does not rise above the target height. In particular, in urban conditions, the range of fire rarely exceeds 200-250 meters, therefore, having installed sight 2, you can not make vertical adjustments: up to 200 meters, the height of the trajectory does not exceed 5 cm, which means that the bullet will fall on the target; at distances from 200 to 250 meters, the aiming point should be taken 10-11 cm higher.
Observation
It is necessary to master the skills of observation, do it intensively and systematically, taking small sectors each time to study. You should not wander aimlessly across the entire observation area - this is a common mistake.
You need to look at everything that happens on foreign territory with suspicion. It is advisable to mentally transfer to the position of the enemy and think about what he could do in such conditions.
When examining the terrain in a given sector, you can divide it into sections equal to the field of view of an optical sight, binoculars or a periscope. You need to work slowly and carefully, blocking the field of view.
If, during observation, a suspicion arose about an object, then you need to inspect everything around it, because the sharpest part of vision does not lie in the center, but at the edge of the eye's field of view. This is especially true when viewed at dawn and dusk.
Slow motion is also easier to detect if you do not look directly at the object: you need to look higher, lower, or slightly away from the object - then the sharpest part of the eye's vision is used.
If possible, you need to try not to conduct observations through binoculars, but to use a periscope: this will protect against detection and bullets of an enemy sniper.
If observation is carried out through an optical sight in conditions of deterioration of visibility (early twilight, haze, etc.), then it is worth using a light filter - it is included in the SVD kit; yellow-orange glass significantly improves visual acuity and contributes to a clearer perception of the edges of the object contour by the retina.
Often the sniper has to shoot at targets that appear unexpectedly. In these conditions, there is no time to determine distances, therefore, at the most probable boundaries and directions, choose noticeable landmarks in advance. In the future, they should be used to count and determine the position of targets and the distance to them.
Disguise
There is no universal camouflage suitable for camouflage in various conditions, so you need to constantly diversify and invent new camouflage means, depending on the task and the conditions for its implementation. The main rules of disguise:
- any measures should be preceded by a thorough reconnaissance of the area and its assessment in terms of camouflage;
- having chosen camouflage equipment, you need to carefully adjust it, not missing the smallest details; you can ask a friend to check if there are any unmasking spots;
- having taken a position near any local object, you need to use it as a shelter only from the side, but in no case from above;
- you should not choose places for a firing position near noticeable landmarks: they will be examined by the enemy in the first place;
- in any case, the position must be taken so that there is a masking background behind;
- you can use the shadow from local objects, but remember that during the day the shadow changes its position;
- well masks vegetation (grass, branches, etc.), but it must be taken into account that it retains its natural color for only 2-3 days; then the leaves will wither and will give out the position;
- for coloring the face and hands, you can use the juice of herbs mixed with the "milk" of plants such as milkweed - all this is kneaded in the recess of the SVD butt and then applied to the skin; however, you need to be careful in choosing herbs so that poisonous plants do not come across, which can cause itching and even burns;
- when entering a position, all traces must be carefully destroyed;
- whenever possible, it is necessary to take measures to eliminate the unmasking effect of shots: when equipping a position in the field, you can arrange a "prone" behind a rare bush or stick several branches three to four meters away from you. When fired, the smoke will remain behind them and the flash will not be so visible; when firing from a building, the position should be in the depths of the room - in this case, the flash and the sound of the shot almost do not come out;
- here is the simplest way to make a prone position in the field: to set up a camouflaged parapet, you need to cut about eight pieces of turf about 20 by 30 cm in size, while the lower, "earthen" part of the turf is cut with a pyramid, at an angle of 45 degrees; then a parapet with grass is laid out of these bricks towards the enemy; at the end of the work, if there is a need to hide the shooting site, the turf is put in place and lightly watered with water;
- being in position in winter, it should be remembered that the vapor from breathing easily unmasks the location, so you only need to breathe through a scarf or mask. To prevent the snow from blowing up when fired, you can sprinkle the snow before "laying" with water from a flask;
- moving around the terrain, it is necessary to make the most of vegetation and all kinds of shelters.
- leaving a firing position, you cannot take it right away: first you need to crawl, stopping not far away and carefully looking around, - the position may be mined or an ambush may await there;
- you should always stay in the lowlands, never go out into open places and on the horizon; if possible, bypass all places where the sniper can be seen by enemy observers;
- movement should be minimized, rapid movement of the arm or leg is very dangerous; but in some cases, while maintaining complete immobility, one can be invisible, being almost in sight;
- it is necessary to master the art of walking so that the effort comes from the hip, and not from the knee; first, the ends of the toes and the front of the foot should be placed on the ground; usually the heel makes noise, especially where there are stones, twigs, etc.
- in wet weather and in light fog, the shot gives out the sniper's position especially strongly (however, in wet weather, an improved view is possible);
- if possible, it is better to work in tandem with a machine gunner: he will muffle your shots with bursts and cover in case of a sudden withdrawal.
Vision
We must constantly remember that the eyes are the main tool of the sniper. Ideally, vision should be excellent, but in principle, some reduction in its acuity is permissible, however, with the obligatory use of glasses or contact lenses.
In order to maintain good vision under heavy loads, the eyes need support. Here are some simple eye prevention exercises (from the experience of sports shooters).
1. Close your eyes tightly for 3-5 seconds, and then keep your eyes open for 3-5 seconds; repeat 8-10 times (this strengthens the muscles of the eyelids and improves blood circulation in the eyes).
2. Massage your closed eyes with a circular motion of your finger for a minute (this relaxes the muscles in the eyes and improves their blood circulation).
3. Stretch your hand forward and look at the tip of your finger, then slowly bring your finger closer, without taking your eyes off it, until it begins to double; repeat 6-8 times (this strengthens the oblique muscles of the eyes and facilitates visual work).
After a heavy load on the eyes, you can use lotions from a weak tea or sage broth: moistened warm swabs are applied to the eyes and hold until they cool.
Secrets of an accurate shot
Making an accurate shot requires the sniper to perform certain actions - ready, aiming, holding his breath and pulling the trigger. All these actions are mandatory elements of a well-aimed shot and are in a certain, strictly coordinated relationship with each other.
In order for the shot to be accurate, the shooter must first of all ensure the greatest immobility of the weapon during its production. Manufacturing must solve the problem of imparting the greatest stability and immobility to the entire system, consisting of the shooter's body and weapons. Since the very meaning of sniper shooting is to hit a small-sized target at a great distance, it is quite clear that the shooter must give the weapon a strictly defined direction, i.e. aim him at the target; this is achieved by aiming. It is well known that breathing is accompanied by rhythmic movement of the chest, abdomen, etc. Therefore, in order to ensure the greatest immobility of the weapon and maintain its direction, achieved as a result of aiming, the shooter must hold his breath for the duration of the shot.
If the sniper is you, then to fire a shot, you need to press the trigger with your index finger; in order not to displace the weapon aimed at the target, you need to press the trigger smoothly. However, due to the fact that you cannot achieve complete immobility at the ready, the trigger has to be triggered in conditions of more or less vibration of the weapon. Therefore, to achieve a well-aimed shot, you need to pull the trigger not only smoothly, but also in strict coordination with aiming.
Let's try to take apart the main elements of an accurate shot separately.
Currently, there are a wide variety of types of fabrication in combat shooting. When shooting from a sniper rifle, four main types are used: lying, sitting, kneeling and standing.
Taking into account the direct dependence of the accuracy of shooting on the degree of immobility of the weapon during the production of a shot, the sniper must pay the most serious attention to the selection for himself of such a fit, which provides the best stability and immobility of the "shooter - weapon" system. In addition, the "super-sharp shooter" should always be faced with the task of choosing such a rational posture (for each type of positioning), in which keeping the body with the weapon in the same position will require the most economical expenditure of physical strength and nervous energy. Therefore, despite the abundance possible options, in general, the manufacture should ensure:
The required degree of equilibrium of the "shooter - weapon" system;
- achieving equilibrium of this system with the least tension of the shooter's muscular apparatus;
- the most favorable conditions for the functioning of the sense organs, primarily the eyes and the vestibular apparatus;
- conditions for the normal functioning of internal organs and proper blood circulation.
Of course, you need to make allowances for the specific conditions of sniper work (in some situations, it is simply impossible to take the correct position), nevertheless, in general, the laws of preparation are the same for everyone.
Since each person has individual physical characteristics, it is natural that there is no template or universal recipe in production that would suit all shooters. This means that the sniper must himself, in accordance with his physical characteristics, choose the best preparation options for different conditions.
Sometimes it is necessary to search for the most convenient options of preparation for a long time and unsuccessfully, every shooter-sportsman knows about it. In order not to go down the wrong path and not waste time, a novice shooter must look closely and carefully study the shooting technique of experienced snipers, adopting everything valuable and useful. At the same time, there is no need to blindly copy any one production option; should be approached from the standpoint of common sense.
In a combat situation, a sniper often has to fire in very difficult and uncomfortable conditions. However, despite this, he must try to be made for shooting so that his position maximizes the ability to conduct accurate fire from the selected position. Not only the results of shooting depend on the correct and comfortable position, but also the comfort during a long stay on a camouflaged "prone".
By far the most advantageous shooting position is prone, using the support. The use of a stop greatly facilitates the shooting conditions; in addition, it contributes to better camouflage and covers from enemy fire.
As a stop, it is best to use as soft material as possible - turf, a bag of sand or sawdust, a backpack. The height of the stop depends on the physique, so the sniper must adjust the stop for himself.
There are usually two methods of using the stop when shooting. The main one is when the rifle does not touch the stop, but lies on the palm of the left hand; in this case, the forearm and hand are on the support, and the elbow (left) rests on the ground. This method is especially beneficial if the emphasis is firm. However, it is difficult to be in this position. long time, therefore, with a long stay in position, I recommend another technique: the rifle is placed directly on the stop with its part under the sight, and the butt is supported by the left hand from below at the left shoulder. In this case, the hands form a kind of "lock" that provides a secure hold of the weapon.
The rifle is applied at four points: the left hand on the forend, the right hand on the pistol grip (butt neck), the butt plate in the shoulder recess, and the cheek on the butt rest. This method of holding was not chosen by chance: this is the only way to ensure reliable fixation of the position of the rifle when aiming and firing, the absence of tremors and the collapse of the weapon to the side. Almost all muscles, with the exception of those directly involved in shooting, remain relaxed. When shooting, a rifle strap can be used to secure the “shooter-rifle” system. It is advisable to use the belt in all positions - lying, sitting, kneeling, standing, except for those cases when you can use the support. When firing from SVD and AK-74 with a telescopic sight, the belt is passed through the forearm and thrown behind the magazine. The tension of the belt should be such that the weight of the weapon falls on the tensioned belt, but at the same time the left hand should not become numb. During training, the shooter must find for himself the most convenient and comfortable position of the belt on his hand and the degree of its tension. To make it easier and faster to find the desired position of the belt in the future, you can sew a large hook on the left sleeve of the outer garment (for example, from an overcoat) - among other things, the hook will prevent the belt from slipping. It is best to make marks on the belt itself that correspond to the position of its buckle at the most convenient length.
When firing a shot, it is very important not to "jerk" the weapon. To do this, you need to grip the pistol grip (butt neck) tightly, but without unnecessary effort, press the trigger with the first joint of the index finger, while moving the finger smoothly straight back and forth parallel to the barrel bore axis. The processing of the descent should be finished immediately after aiming the weapon at the aiming point.
The position for prone shooting, in comparison with other types of shooting, is the most stable, since the shooter's body lies almost completely on the ground and both elbows rest on the ground. The large area of the support surface of the shooter's body at a low height of its center of gravity allows creating the most stable balance of the "shooter - weapon" system.
The most important thing is that the prone position should provide not only good stability of the rifle with the least tension of the sniper's muscles, but also a long stay of the body in the same position during shooting, and such a position of the head, in which the most favorable conditions for the work of the eye during aiming.
The difficulty in choosing a convenient and correct fabrication for oneself is that the requirements mentioned above are not only interconnected, but also in some contradiction. For example, if you increase the turn of the body to the left, then it will be easier for you to breathe, but the conditions for the attachment and the work of the leading eye during aiming will worsen. If you begin to bring your left hand supporting the weapon as far forward as possible, the position will become lower and, naturally, more stable; but at the same time, the conditions for breathing will worsen and the load on the left arm will increase, which entails a rapid fatigue of its muscles.
Based on all this, the sniper must find for himself the most acceptable option for making, taking into account the characteristics of his physique.
The stability of the position and the duration of the shooter's body in the same position depend primarily on the position of the body, and in particular on the orientation of the body in relation to the firing plane. Practice has shown that it is best to turn the body in relation to the firing plane at an angle of 15-25 degrees. With such a turn, his position will be comfortable, the chest is not very constrained, which means that breathing is relatively free. At the same time, there will be favorable conditions for applying and aiming.
By the way, in contrast to the standard fit recommended by all manuals, the so-called "Estonian" fit turns out to be quite convenient for high-speed shooting. With her, the right leg is bent at the knee, while the shooter himself is not lying flat on his stomach, but slightly on his left side. In this position, the chest is not constrained, breathing is deeper, it becomes easier to reload the weapon and work with the handwheels of the optical sight.
Shooting from the knee by snipers is most often used in combat in a city, when the shooter provides fire cover for assault groups. In such conditions, the fire is fired from short stops when there is no time to lie down comfortably. As well as when making lying down, it is advisable to use a rifle strap here.
The left leg should be strictly under the left elbow with the elbow resting on the knee. In this case, the elbow of the right hand does not need to be set aside; on the contrary, it is better to try to press it against the body.
You can shoot from your knee, for example, in thick, tall grass that blocks your view in a prone position, but you need to remember that this position is not suitable for particularly accurate shooting, as well as for a long stay in this position.
Sitting shooting is not very common in our country, although it is highly respected and practiced in the Western armies. There are two options for this fabrication: sitting in Turkish and Bedouin. When shooting while sitting in Turkish, the sniper pulls his legs under him (probably everyone knows how to sit in Turkish), the foot of one leg is passed between the thigh and lower leg of the other, and the elbows rest on the knees, or, if it’s more convenient, drop behind the knees.
With the Bedouin method, the shooter sits with his legs wide apart, bent at the knees, the heels rest on the ground (so that the legs do not slip during the shot), and the elbows, as in previous case rest on their knees.
Both methods are quite stable and convenient, after some training, you can sniper fire this way even with some comfort. However, in both positions it is difficult to sit for more than half an hour (especially in Turkish) and from them it is difficult to move quickly and imperceptibly during an emergency change of position.
Shooting from a rifle while standing as a form of preparation for a sniper is the last thing to do, because it is very difficult to execute and, most importantly, unstable. But if, nevertheless, in some difficult circumstances you have to fire from a sniper rifle while standing, then, firstly, use a belt (in the previous version); secondly, hold the rifle by the pads so that the magazine rests on the left hand just below the hand; and thirdly, do not complicate the situation and try to find some kind of vertical object (tree trunk, corner of a building) to rest against it with your left forearm.
How to aim correctly using a telescopic sight? The device of the optical sight provides for aiming without the participation of the front sight and the sight slot installed on the rifle barrel, because the aiming line in this case is the optical axis of the sight, passing through the center of the lens and the tip of the central square of the sight reticle. The aiming reticle and the image of the observed object (target) are in the focal plane of the lens, and therefore the sniper's eye perceives with the same sharpness both the image of the target and the reticle.
When aiming with an optical sight, the position of the shooter's head should be such that the line of sight passes along the main optical axis of the sight. This means that you need to align the eye with the exit pupil of the eyepiece and then bring the edge of the square to the aiming point.
The eye should be at the distance of the exit pupil removal from the outer lens of the eyepiece (eye distance). Depending on the design of the sight, this distance is 70-80 mm, it is necessary for safety when recoiling the weapon.
During aiming, the shooter must carefully ensure that there are no darkening in the field of view, it must be completely clean.
If the eye is closer or farther than the eye distance, then a circular blackout is obtained in the field of view, which reduces it, interferes with observation and makes aiming difficult. However, if the blackout on all sides is the same, then there will be no bullet deflections.
If the eye is located incorrectly relative to the main optical axis of the sight - shifted to the side, then moon-shaped shadows will appear at the edges of the eyepiece, they can be on either side, depending on the position of the axis of the eye. In the presence of moon shadows, the bullets will deflect in the opposite direction. If you notice shadows while aiming, find a position for the head where the eye can clearly see the entire field of view of the scope.
In other words, in order to ensure accurate aiming with an optical sight, the sniper must direct all attention to keeping the eye on the optical axis of the sight and aligning the central square with the aiming point.
Triggering technique is of great and sometimes decisive importance in firing a shot. First, the trigger should not shift the weapon aimed at the target, i.e. should not knock down the tip; for this, the shooter must be able to pull the trigger very smoothly. Secondly, the trigger must be pulled in full accordance with visual perception, i.e. to coincide with a certain moment when the "straight front sight" is at the aiming point.
This means that in order to achieve an accurate shot, the sniper must perform two actions - aiming and smoothly pressing the trigger - in strict coordination with each other.
However, a difficulty arises: when aiming, the weapon is never stationary, it always vibrates continuously (depending on the stability of the shooter's position). As a result, the "flat front sight" constantly deviates away from the aiming point. The shooter must complete a smooth trigger pull at the very moment when the central square of the reticle is at the aiming point. Since the fluctuations of the rifle for many, especially untrained shooters, have an arbitrary character, it is very difficult to predict when exactly the square will pass through the desired point. Mastery in the production of a descent is the development of skills aimed at improving the coordination of movements and control over their implementation.
Regardless of what type of trigger the shooter will use, it is very important that he observes the basic requirement: the trigger must be released so as not to knock down the aiming, i.e. very smoothly.
The production of a soft release places special demands on the function of the index finger when the trigger is pressed. The quality of the shot depends to a greater extent on this, because the most careful and fine aiming will be disrupted at the slightest wrong movement of the finger.
In order not to disturb the aiming, the right hand must correctly wrap around the stock neck (pistol grip) and create the necessary support so that the index finger can overcome the trigger pull. You need to grip the handle tightly enough, but without unnecessary effort, because muscle tension in the hand will lead to increased vibration of the weapon. In addition, it is necessary to find a position for the hand so that there is a gap between the index finger and the grip. Only then the movement of the finger when pressing the trigger will not cause lateral shocks, displacing the weapon and knocking down the aiming.
The trigger should be pressed with the first phalanx of the index finger or the first joint - only such pressing requires the least finger movement. It is necessary to press so that the index finger moves along the axis of the barrel bore, straight back. If you push a little to the side, at an angle to the axis of the bore, this will lead to an increase in trigger tension and an abrupt movement of the trigger caused by skew. This can also confuse the lead.
To produce an accurate shot, the sniper must learn to increase the trigger pressure smoothly, gradually and evenly. This does not mean slowly, but precisely smoothly, without jerking. Descent should take 1.5 to 2.5 seconds.
In addition, it is necessary to pull the trigger not only smoothly, but also in time, choosing the most favorable moments when the oscillations of the rifle will be the smallest.
The system "shooter - weapon" during aiming and firing a shot undergoes complex vibrations. The reason for this is the action and reaction of the muscles during the work to hold the shooter's body in a certain position, as well as the pulsation of the blood. At first, when the shooter makes a rough aim and has not yet managed to properly balance the weapon, the fluctuations will be large. As the aiming is refined, the oscillations of the weapon attenuate somewhat, and after a while, when the muscles begin to get tired, the oscillations increase again.
From this it is clear that under such circumstances, it is necessary to start a smooth pull on the trigger during the period of rough aiming of the weapon; then, refining aiming, smoothly increase the pressure on the trigger, trying to complete it at the moment when the rifle experiences small vibrating vibrations or seems to have stopped altogether.
Unfavourable conditions lighting makes aiming very difficult. The sniper's eyes are blinded by the sun, snow cover on a sunny day, excessively bright target illumination, sun glare on the surfaces of weapons and sights. In such conditions, the unprotected eye becomes irritated, tears appear, pain appears, involuntary squinting - all this not only makes aiming difficult, but can lead to irritation of the mucous membrane and eye disease. Therefore, the sniper must take care of creating favorable conditions for the eye during aiming and preserving his vision.
When shooting with a PSO-1 optical sight, it is necessary to protect the objective part of the sight from the sun with a retractable hood, and the eyepiece - with a rubber eyecup. The hood and eyecup prevent direct and lateral sunlight from entering the lens or eyepiece, causing reflection and light scattering in the scope lenses, which makes it very difficult to work with it.
To prevent the surface of the barrel from shining, you can stretch a cloth tape over it, but it is best to just wrap it with shaggy camouflage tape - this will remove the shine and disguise the weapon.
To protect your eyes from bright sunlight, you can successfully use the visor of a field cap.
In cases where targets are very brightly lit, be sure to use a light filter, putting it on the eyepiece of the sight. The yellow-orange light filter included in the PSO-1 kit well removes the violet part of the spectrum, which contributes to the formation of indistinct images on the retina. Also, periodically rest your eyes and gaze into the distance - it's simple and effective.
In conclusion, we can formulate the basic rules for accurate shooting from a rifle with a telescopic sight.
Always firmly "insert" the butt into the shoulder and use the stop in a monotonous manner: if you do it every time in a new way, then due to the variety of departure angles, the dispersion of bullets in the vertical plane will increase. Remember that when the stock is resting on the shoulder with the lower angle, the bullets will go higher, and upper corner- below.
When the left elbow is displaced during the production of a series of shots, individual holes are torn up and down, and there will be as many breaks as you have displaced the elbow.
When preparing to shoot, do not place your elbows very wide; such an arrangement of the elbows disturbs the stability of the rifle, tires the shooter and entails the spread of bullets. However, too narrow a position of the elbows compresses the chest and restricts breathing, which also impairs shooting accuracy. If you lift the stock with your right shoulder at the moment of triggering or press your cheek too hard against the stock, then the bullets are deflected to the left.
Sometimes the shooter, having taken the wrong turn of the body in relation to the target, seeks to direct the rifle at the target with the muscular effort of the arms to the right or to the left. As a result, when fired, the muscles are also weakened by the rifle, which means that the bullets are deflected in the direction opposite to the applied force. The same happens if the sniper uses his hands to raise or lower the rifle to the aiming point. Checking the correct direction of the weapon to the target can be quite simple: aim the rifle at the target, close your eyes, then open them and see where the aiming line has deviated. If the aiming line deviates to the right or left, move the entire body to the right or left, respectively; when deflecting the weapon up or down, without moving your elbows, move forward or backward, respectively. The stability of the rifle is ensured by the correct position of the arms, legs and body - with an emphasis on the bone, but not at the expense of great muscle tension.
The accuracy of shooting is affected when you take your cheek away from the butt when you pull the trigger. In this case, you still lose the aiming line. This habit leads to the fact that over time you will begin to raise your head before the drummer breaks the cartridge primer. Train yourself to keep your head free and your cheek firmly attached to the left side of the butt, but without tension. In addition, you will get used to the fact that for a certain period of time
(2-3 seconds) maintain the position of the aiming line.
The rifle should not lie on the fingers of the left hand, but on the palm of the hand, so that the palm is turned with four fingers to the right. In this case, the thumb should be on the left, and the other four on the right. If the rifle lies on the fingers, then its stability is disturbed and the bullets go to the right and down, i.e. the dumping of the weapon occurs. The fingers of the left hand should not grip the fore-end too much, you need to hold the weapon like a bird - gently so as not to strangle, but also firmly so as not to fly away.
The position of the body when ready for prone shooting should be free, without the slightest tension and without bending in the lower back. The bending of the body causes muscle tension, as a result of which the correct attachment, position of the hands, etc., is disturbed, and as a result, the dispersion of bullets increases. Incorrect body position is corrected by moving the legs to the left or right.
Removal of the shooter's eye from the scope eyepiece should be constant, depending on the physique. It should be approximately 6-7 centimeters (in accordance with the design of the scope).
Remember a simple thing: when you pull the trigger, you must hold your breath. Some novice shooters take some air for this, and then release the trigger, although this creates general tension for the shooter. You will get used to observing this breathing pattern: after taking in the air and exhaling almost all of it, hold your breath and only then begin to pull the trigger, i.e. the shot must take place on the exhale. The first seconds after holding the breath are the most favorable for firing a shot.
Some shooters react incorrectly to the inevitable small fluctuations of the telescopic sight reticle center square near the aiming point: they try to fire a shot exactly at the moment when the point of the square aligns with the aiming point. As a rule, in this case, there is never a smooth descent and sharp bullet separations are obtained. Unlearn yourself from this habit: such fluctuations have very little effect on the accuracy of the shot.
Affected area
It is generally accepted that business card sniper is headshot. This is quite justified, since a bullet hitting any part of the skull leads to damage to the brain as a whole due to hydrostatic shock. Damage to the skull leads to very serious consequences, the result of which is loss of consciousness and the cessation of all vital functions. If a bullet hits the face, it usually affects the brain or spinal cord; when shot in the back of the head, the central part of the brain is affected and the person immediately falls.
However, in some situations, the sniper has to shoot from a long distance, when it is difficult to accurately aim at the head. In addition, the head is the most mobile part of the human body, and it is not so easy to get into it. In this case, aiming should be carried out at the central part of the enemy's corps. There are three most important areas of damage - the spine, solar plexus and kidneys. Closer to the central axis of the body (i.e. to the spine) are the large blood vessels - the aorta and vena cava - as well as the lungs, liver, kidneys, and spleen. When injected into the spine, the spinal cord is affected, which most often causes paralysis of the legs. The solar plexus is located directly under the chest, getting into it causes severe damage to the internal organs, while the person bends sharply in the belt. A shot in the kidneys leads to shock, and then to death, because in the kidneys, nerve endings are concentrated and there are a large number of blood vessels. The hit of a rifle bullet in the human body causes hydrostatic shock, because a pressure wave is formed due to the displacement of the water-saturated tissues. As a result, a temporary cavity is formed, which is many times larger than the size of the inlet. The pressure wave can damage internal organs not directly affected by the bullet.
In addition, another result of a bullet hit is the formation of secondary fragments - particles of shattered bones. These fragments hit the internal organs, moving along different trajectories. This point is especially important to remember for snipers of special units when carrying out operations to free hostages, since a hostage who is at a very close distance from a terrorist can be injured precisely by secondary fragments of bones. In such conditions, it is advantageous to fire a shot at the moment when the terrorist is behind the hostage, and not in front of him or from the side.
On the other hand, an army sniper can only injure his victim, because then several enemy soldiers will be forced to deal with the wounded, and, perhaps, one of them will stand in front of a shot; in addition, the appearance of the wounded in the position undermines the enemy's morale.
In addition to other characteristics of the weapon, a professional sniper must know what the stopping and lethal effect of a rifle bullet is. Stopping action is the ability of a bullet to immediately incapacitate a living target; lethal action - the ability to inflict fatal damage on the enemy. It is usually believed that the minimum kinetic energy of a normal-caliber bullet required to disable the enemy should be at least 80 J. For an SVD rifle, the range at which the bullet retains such destructive power is about 3800 meters, i.e. far exceeds the range of an aimed shot.
The area of the human body, with the defeat of which the probability of instant death will be maximally high, is approximately 10% of the entire surface of the body (when using conventional ammunition).
At one time, American military doctors, following the results of the Vietnam War, found that when using conventional rifle ammunition death occurs with damage to the head - in 90% of cases; with chest lesions - in 16% of cases; if the bullet hits the heart area, death occurs in 90% of cases; in case of contact with the abdomen - in 14% of cases (subject to the provision of timely medical care). The head is the most vulnerable part of the human body in terms of wound ballistics. A bullet hitting such parts of the brain as the medulla oblongata and the cerebellum leads to the death of the victim in almost 100% of cases - if they are damaged, breathing immediately stops, blood circulation and the neuromuscular system of a person are paralyzed. In order to hit the enemy with a bullet in the region of the cerebellum, you need to aim at the upper part of the bridge of the nose. If the target is turned sideways - under the base of the ear. In cases where the enemy is standing with his back, - at the base of the skull. However, some snipers consider the zone between the nose and upper lip to be the most advantageous point - the bullet destroys the upper part of the spinal column, causing a severe injury, in most cases incompatible with life. And yet, in size, the head occupies only one-seventh of a person's height, so it is very difficult to get into it from a long distance.
In general, the most effectively affected area of the human body is limited from above by a line that runs two fingers below the level of the collarbones, and from below - two fingers above the navel. A bullet wound to the abdomen below the specified zone leads to painful shock, and if timely medical care is not provided, to death, but in most cases it does not deprive the enemy of the ability to resist immediately following a defeat - this is a particularly important moment for snipers of anti-terrorist units.
Among all modern soldiers, the sniper is in a special position. The very name of this military profession commands respect that borders on fear. This man with a gun is able to do what is inaccessible to others, namely, to hit a target with pinpoint accuracy from a long distance. Sometimes, when the target itself does not even suspect that it was on the fly.
Without this skill, everything else loses its meaning. First of all, the cadet is taught to shoot from a prone position with a support. Since in practice the sniper has to shoot from different positions, he is taught to shoot prone without support, shooting from the knee, shooting while standing and sitting.
The instructors set the technique - teach the correct aiming, teach how to hold your breath and set the correct descent technique. Eliminate technical errors, such as blinking at the moment of a shot, delaying aiming (aiming), excessive tension of individual muscle groups and other flaws.
Read about the initial training of a sniper in the article "". After a sniper has successfully completed basic training in open-sight shooting, he is trained to use the "optics".
Using a telescopic sight.
The presence of an optical sight allows you to hit targets at a long distance. The optical sight allows you to hit small, camouflaged, hard-to-see targets that are difficult to see with the naked eye. "Optics" makes it possible to conduct aimed fire in poor visibility and poor lighting, up to the possibility of hitting targets in the light of the moon. Plus, to observe the enemy, identify targets, determine the distance to them, and, in addition, adjust the shooting.
However, shooting with optics is harder than using an open scope. Moreover, as paradoxical as it sounds, the greater the magnification of the sight, the more difficult it is to shoot.
Most often, sniper sights used in all armies of the world provide a magnification of 3.5-4.5 times. During World War II, German snipers used ultra-precise Mauser Gewehr 98 rifles, equipped with optical sights with a magnification of 2.5 times. And that was enough. Of course, the Germans also had sights with a tenfold increase, however, such sights were used only by outstanding masters.
Switching to "optics" at first, the shooter suddenly discovers that he began to shoot not better, but worse. The stronger the magnification, the more the target "jumps" in the visual field of the sight. Accordingly, it is more difficult to "catch on" for it. "Targeting" occurs. Accordingly, the shooter tries more and more and strains, because of which the target "jumps" even more.
Only professionals can use "optics" with high magnification the highest qualifications, and even then, using emphasis (for example, in an ambush). For snipers who are part of mobile reconnaissance groups, a sight with a high magnification is contraindicated. Mid-range shooters hit better when using low magnification scopes.
The optical sight makes life easier for a trained shooter, but for an untrained, on the contrary, it complicates it, just like in that saying about a bad dancer.
When working with "optics", the sight field on all sides should be completely clean, without any kind of darkening.
The eye should be brought closer to the eyepiece gradually. A somewhat narrowed visual field will expand until its "front" border becomes clearly visible. For a given shooter, this will be the working distance between the eye and the scope. In the future, this border must be constantly monitored. To develop this skill, you can carry an optical sight with you for several days and use it like binoculars.
Development and improvement of shooting skills
To develop shooting skills, the shooter methodically, over and over again, shoots blank chambers (as if the cartridge in the barrel is a combat one), trying to "remember" where the front sight was looking at the moment the trigger was pulled. In this position, the shooter and his instructor can immediately see all the mistakes made. Periodically, after 2-3 shots, the shooter shoots with a combat one (so that the shooter does not lose concentration, and also in order to check and evaluate the results achieved).
Sniper training is painstaking, hard work, because the muscles must "remember" everything that is needed for marksmanship, so that then everything happens automatically. However, when using the same exercise, the human body gradually gets used to it and stops responding to it. New stimuli are needed.
The following exercises are used to train experienced snipers.
"Sniper qualification"
Two growth targets are set at an unknown distance (400 to 600 meters). The task of the sniper pair is to determine the distance using only one aiming reticle, without a rangefinder, using binoculars or a telescope, and then execute one shot at each of the targets.
"Shooting at small targets."
Distance from 500 to 600 meters. A pair of sniper stands at the firing line. An easily destructible object (for example, a brick) is used as a target. Palm rests cannot be used. On the signal, you need to hit the target as quickly as possible. The limit of shots is 10. The result is assessed by the number of shots and the time spent on them, and if the target is not hit, by the number of points on the chest target installed behind the brick.
“Police. Shooting on command "
Distance from 150 to 200 meters. The target has affected areas. On command, two snipers shoot at the same time. The task is to hit the target with the first shot, within one second. The result is assessed by the number of points.
“Police. Shooting at small targets with approach "
Distance 150-200 meters. 3 circular targets (diameter 70 mm). The task is to reach the firing line (100 meters), with the help of improvised means (pole, rope with a "cat") climb to the 2nd floor of the building, fire 3 shots at each of the 3 targets. The exercise is given 1 minute.
"Night shooting"
The sniper pair needs to find enemy soldiers at an unknown distance (600-900 meters) in a given area. 3 growth targets with affected zones are illuminated with a kindled fire. In total, 5 shots are given, the time allotted for execution is 5 minutes. In this case, snipers should not be detected. Illuminated bullets are prohibited.
(version - a target is a weakly illuminated ball, one sniper is firing. The number of shots is unlimited).
"Night sniper ambush"
An ambush sniper pair is monitoring. After the signal at a distance of 100 meters at a speed of 5 km / h, a dummy moves (a rubber ball imitates a head). The sniper pair must hit the dummy (conditional enemy). After passing 200-300 meters, the dummy will disappear from the field of view.
"Defensive Sniper Combat"
A sniper pair must, from a camouflaged defensive position, destroy a machine gunner who is in sight at a distance of up to 1000 meters. After the first shot, 5 enemy soldiers appear at a distance of 250 to 500 meters, advancing on the position of a defending sniper pair (5 stationary targets with a rubber ball instead of a head). The number of shots is unlimited.
The execution of the task is assessed according to such criteria - defeat / non-defeat of the machine gunner, the number of soldiers hit, the time spent, the number of shots.
"Sniper on the offensive"
At a distance of 600, 800, 1000 meters, the signalman, commander and machine gunner of the enemy are located. The task of the sniper pair is to destroy all 3 targets one by one. 1000 m - a sphere with a diameter of 400 mm, 800 m - a sphere with a diameter of 300 mm, 600 m - a brick. Target display time is limited. The performance of the task is assessed by the number of targets hit, by a long-range shot, by the time spent on hitting targets and the number of shots.
"Sniper ambush"
After a sound signal from a distance of up to 500 m, a vehicle starts moving at a speed of 30 km / h. The balloon in the car imitates the head of the enemy commander. After passing 250-300 m, the car disappears from sight. From a distance of 350 m. After the first shot, 5 targets appear at a speed of 5-7 km / h. move towards the ambush and complete the movement 50 m before the firing line.
The task of the sniper pair is to destroy the enemy commander and the rest of the targets in the shortest possible time.
"Tactical sniper duel"
The exercise is performed by 2 sniper pairs. At a distance of 1500 meters, 2 balloons of different color with a diameter of 400 mm were installed (each pair has its own color). The task of the sniper pair is to destroy the enemy's ball without allowing themselves to be detected. The number of shots is unlimited. Competitive sniper pairs shoot from an acceptable distance for themselves. Any maneuvers are allowed. The judges observe the pairs, if detected, the exercise ends, the task is considered not completed. For observation, the judges can use any optical devices. The execution time is limited to 30 minutes. The assignment is assessed by the time spent.
"Shooting at the ordered distance"
Competitors must, make a forward march, moving to the control point. Each sniper pair chooses the distance independently. The minimum target visibility distance - 650 m
The task of the sniper pair is to hit the target from the maximum distance, while spending the least amount of rounds.
After hitting the target, the ranges are measured and points are calculated (1 meter of distance is equal to one point gained).
It has been empirically established that shooting training should be carried out no more often than every other day, and the duration of such training should not exceed 2.5 - 3 hours. Otherwise, the so-called "overtraining" appears and then grows, which is well known in any sport.
Observation training
Each sniper is also a little scout. Indeed, before destroying a target, it also needs to be detected, as well as imperceptibly approaching a distance from which an aimed fire can be fired. Wait for the right moment or the signal to attack. And before the attack - carefully observe the terrain, so as not to turn into a target for the enemy (for example, for his counter-sniper group). The targets of a sniper are not always recklessly waiting for their hour of death. More often they disguise themselves using the slightest opportunity. The sniper's task is to notice any, even the smallest deviations in the state of natural objects, the slightest changes in their location. A branch swayed a little, despite the fact that there is no wind? It means that there is a man lurking there. An extra Christmas tree appeared somewhere in the distance? It means that something is disguised in this place. Has grass been applied? It means that not long ago someone passed through this place.
The sniper must train observation. Moreover, he has time for this. Shooting training, together with preparation for them, takes at most half a day, and is carried out no more often than every other day.
Several very different objects are laid out in front of the sniper: stones, buttons, cartridges, cigarettes, watches, compass, chevrons, stars from shoulder straps. The sniper is allowed to inspect this still life for several hours, after which they are covered with a tarpaulin (a still life, not a sniper) and told to list all the objects that he remembered. This is followed by provocative questions. What kind of cartridges / cigarettes? How many buttons were there? What time did the clock show? Each time, less and less time will be devoted to inspecting such an exposition, and the expositions themselves, of course, will change.
Then the lesson is carried out in nature. The sniper looks at the landscape, then turns away, giving the opportunity to make any changes near the target field (break a branch, throw a cigarette butt, put a tin can). After that, the sniper should turn around and talk about what has changed. Gradually increase the distance (from 100 to 300 meters)
Then, already at the range, snipers (already with optical devices) watch the terrain for hours, looking for camouflaged positions.
Experienced snipers, reinsuring themselves in advance from their colleague “on the other side”, mentally put themselves in his place (like in chess) and figure out where and when the enemy is equipping a sniper position. In a tactical game, this makes it possible to win, as in a real battle, but there life itself is at stake.
Sniper teams are made up of pairs, threes and fours. Most often snipers are used as part of sniper pairs. The use of snipers in pairs allows them to more effectively ensure mutual safety; increases the time of active work (due to load distribution); allows you to deploy, find and destroy targets faster; reduces psycho-emotional overload.
Snipers in a pair are designated by numbers. The first number is a shooter with a rifle, the second number is armed with a support weapon. It can be either a self-loading rifle (the SVD could be suitable for this role in the presence of a grenade launcher), or an automatic rifle with a grenade launcher, since the second number, in particular, is responsible for close firing contacts that may arise during the advance to a firing position. It is very important to understand that the second number is, in fact, the main one in the pair. At first glance, this may seem paradoxical, since the first number is shooting. But shooting is not the most difficult thing, I mean pulling the trigger. The hardest part is calculating this shot. And that's exactly what the second number does.
The duties of the second number, in addition to preparing data for shooting, include the selection and assignment of priority targets, preparation and testing of special equipment. He is leading the march, he is the leader. And all the measures for the defense of the pair lie mainly on him. When entering a firing position, he follows the first number, that is, it becomes a slave. He covers the first number from pursuit, since he has a weapon that allows him to suppress targets at close distances. Together with the first number, he participates in the preparation of field long-term shelters, makes sketches and fire cards. His word is decisive in determining the distance to the target. He monitors with a telescope, evaluates the wind, measures meteorological parameters, carries out all ballistic calculations and informs the first number of the finished correction, which must be displayed on the sight. It takes into account the change in the wind and gives the command to the first number to open fire, when it considers that the settings made on the scope correspond to the wind that is in this moment available. He also uses radio communications. Records all intelligence information along the route. Directs and coordinates support units, if any. Installs special equipment, including explosive devices and so on. Removes traces of stay when leaving a position. Now who would argue that this is the main number in a pair?
Another function of the second number that needs to be emphasized is the hit score. It is not always possible to evaluate a hit at long ranges without resorting to special methods. There is a method for assessing a hit using a telescope, which has long been developed in the West and is actively used in the art of sniper. The method is as follows. The flight of a bullet is very clearly visible through the tube. More precisely, it is not the bullet itself that is visible, but the vortex that the bullet leaves behind. This can be done only due to the correct position of the observer relative to the shooter.
The basic principle (although it does not always work, and again, you need to have experience in order to find the correct position before the shot) is to be located strictly along the axis of the barrel just behind and above the butt of the weapon.
The second number evaluates whether a hit occurred or not, according to a given vortex wake. The first shot should always be done by setting the required number of vertical and horizontal corrections on the drum (the so-called basic correction). But the second shot needs to be carried out with an offset (operational amendment). The second shot is fired based on the hit score made by the second number, preferably no later than 2-3 seconds after the first. This technique requires practical experience for a fairly long time.
The first number follows the second on the march and covers the rear. Removes footprints throughout the march. Leads during the exit to the firing position, which is usually done with all means and methods of concealment. Leads while moving in the footsteps of the enemy. Conducts observation with binoculars. Introduces correction for sight, wind, distance, angle and other parameters. Shares his opinion on the distance to the target, since it is still a creative and collaborative process (in the absence of a laser rangefinder). He destroys living force and material goals. He makes target designation to the unit, with the help of tracers.
In fact, the leader of the pair is the second number. And maybe we should break the tradition and call him number one. But all over the world they adhere to the classic numbering.
Although this has already been done in threes and fours. Pairs are used mainly in military and police units. In special forces, such as the Expeditionary Force marines The United States (namely, the sniper groups of its reconnaissance units - the Marine Force Unit), as well as the SEAL sniper teams, prefer to work in threes. The main weapon of fire in the trio is a 50-caliber rifle (or rifles), usually a Barrett M82 A1.
Responsibilities in the Marines sniper troikas are distributed as follows: the first carries the front of the rifle (barrel), the second carries the rear, the third carries the sight and ammunition. The arrow function is rolling. The functions inherent in the second number of the pair (the commander of the sniper group), as a rule, are assigned to one person.
Triples of SEAL snipers work as follows: the first is the most physically trained, "porter", carries all communications equipment and special means, may be the commander of the troika. The second - the shooter, carries the front of the rifle. The third is an observer, gives meteorological parameters and the wind, carries the rear part, a bolt, a muzzle brake, ammunition, a telescope, a rangefinder. Depending on the mission, more than three people can be assigned to a sniper group.
The deliberate use of fours occurred for the first time in the 1st paratrooper group of forces special operations(1 Special Forces Group (Airborne). Their main task is to work on hard targets at a distance of up to 2.5 km. Among the main targets are ground installations, including tactical missiles, air defense systems, that is, any material targets, detection which are difficult from the air or from space during their inactive state. These groups are armed with four rifles, three of which are 50 caliber, that is, 12.7 mm. The fourth shooter is armed with a rifle in caliber .388 Lapua Magnum. in terms of manpower, he is responsible for the entire calculation of ballistic corrections and so on, inherent in the group commander. He communicates the data to the entire trio, which introduces a ready-made amendment to the sight. He also assigns them targets. He also gives the command to open fire. share of all the work is done by this second number, which is actually the "director of fire" for the American military terminology, that is, the commander of the sniper group.
Vladislav Lobaev
Photo from editorial archive
Brother 07-2009
- Articles »Professionals
- Mercenary 4125 0
Today in most armies, there are two main concepts of sniping:
A sniper pair or a single shooter operates in the "free hunt" mode, i.e. Their main task is to destroy enemy manpower on the front line and in the immediate rear.
A sniper-reconnaissance patrol, consisting of four to eight riflemen and two observers, fetters the enemy's actions in its zone of responsibility and collects information about the organization of the enemy's forward edge. If necessary, such a group can be reinforced with a single machine gun or grenade launcher.
To carry out the combat missions assigned to him, the sniper must be located in a separate, carefully disguised position. When a target appears, the shooter must quickly assess its value (i.e. determine whether it is worth shooting at this object at all), wait for the moment and hit the target with the first shot. In order to produce the greatest psychological effect, it is advisable to hit targets that are as far away from the front line as possible: a well-aimed shot "from nowhere", hitting a person who felt completely safe, plunges other enemy soldiers into a state of shock and stupor.
Sniper operations are most effective in positional battles. In these conditions, three main forms of combat work are applicable:
The sniper (sniper group) is located among their positions and does not allow the enemy to move freely, conduct surveillance and reconnaissance;
The sniper (sniper group) "free hunts" away from their positions; the main task - the destruction of high-ranking command, the creation of nervousness and panic in the immediate rear of the enemy (ie "sniper terror");
"Group hunting", i.e. the work of a group of snipers of four to six people; tasks - disabling key objects when repelling enemy attacks, ensuring secrecy when moving their troops, simulating an increase in combat activity in a given sector of the front. In some situations, it is advisable to use snipers on a company or battalion scale centrally. This allows you to strengthen fire resistance to the enemy in the main battle area.
When working in pairs, one of the snipers conducts observation, target designation and reconnaissance (spotter or observer), and the other - fire (fighter). After 20-30 minutes, snipers can switch roles, because prolonged observation dulls the acuity of the perception of the environment. When repelling attacks in cases where a large number of targets appear in the zone of responsibility of the sniper group, and in a sudden collision with the enemy, both snipers are firing at the same time.
Sniper groups, including 4-6 shooters and the calculation of a single machine gun (type PKM), can be used to reach the flank and rear of the enemy and inflict a sudden fire defeat on him.
It is extremely important not only the work of the sniper himself, but also of his partner - the spotter. It solves the following tasks: transfers and prepares optical surveillance equipment for operation, determines the route and methods of movement, provides fire cover for the sniper using an assault rifle with an under-barrel grenade launcher, disguises and eliminates traces on the route of movement, helps the sniper when arranging a shooting position, monitors the terrain and draws up a report on the operation, monitors the battlefield and target designation, maintains radio communications, uses sabotage equipment (antipersonnel mines and smoke bombs).
The most effective sniping tactic is a long daytime ambush. It is carried out at predetermined positions in the area of the most probable appearance of targets. The main task of an ambush is to restrict the movement of the enemy, demoralize him and collect intelligence information.
All available intelligence information should be used when choosing an ambush site. In cases of enemy activity in this area, snipers must be accompanied by a cover group. Before going into an ambush, a sniper pair must agree on the coordinates of their "prone", the time and approximate routes of approach and departure, passwords, radio frequencies and call signs, forms of fire support.
An ambush is usually carried out at night, so that by the morning it is already in place. During the transition, complete secrecy must be observed. At the ambush site, reconnaissance of the area is carried out, the position is equipped and camouflaged. All this is done after dark, all work must be completed at least an hour before dawn, when the enemy's night vision devices will start working. With the onset of day, the sniper pair begins to observe and search for targets. As a rule, in the early morning and at dusk, soldiers lose their vigilance and may expose themselves to a shot. In the course of observation, the areas of probable appearance of targets are determined, the speed and direction of the wind are constantly assessed, landmarks and the distance to them are outlined. At the same time, throughout the day, snipers must observe complete immobility and strict camouflage.
When targets appear, the group must quickly assess their importance and determine whether to open fire on them. Having opened fire, the sniper in many cases unmasks his "prone", so you need to shoot only at the most important and clearly visible targets. Aiming at the target is usually carried out by both snipers: in the case of a miss, the observer will either also open fire, or will be able to correct the shooting of his first number.
The decision on whether to stay in position further is made by the senior sniper pair after the shooting. If nothing suspicious happens at the enemy's positions after the shot, then the group can remain in position until dark. Leaving the position is carried out only at night, as imperceptibly as possible. In this case, the ambush site is given its original appearance, all traces of "lying" are carefully eliminated in order to reuse it if necessary (although this is done only in exceptional cases). In some situations, a surprise mine may be placed on the abandoned position.
Special mention should be made of the tactics of snipers serving at checkpoints. When organizing a checkpoint, it must necessarily include a group of snipers performing specific tasks to ensure the safe operation of the post. Therefore, a position for observation and fire, which would provide the maximum sector of view and shelling, secrecy from enemy observation, should be chosen not only on the territory of the checkpoint, but also behind it. The specifics of the checkpoint's work does not guarantee maximum secrecy, so the sniper must remain constant vigilance so as not to betray himself. To do this, he must observe the following precautions: be always prepared for the position to be monitored; do not make unnecessary movements; do not use observation devices without protection from direct sunlight on the lenses; maintain a natural position; take a position or make a change in secret.
A circular defense is organized at each checkpoint. Therefore, snipers equip the main positions in the center of the defense area, but they are not used in day-to-day work. Particular attention is paid to the interaction of snipers. If there are several checkpoints in one direction, then snipers will definitely organize interaction with them.
It is believed that in the Russian law enforcement agencies, unlike similar Western structures, little attention is paid to the development of the sniper business. Some domestic experts argue that world-class arrows are only in the Center special purpose FSB of Russia, but they are armed with old British rifles.
Meanwhile, in trade publications and social networks you can see photographs from various competitions of sniper pairs, where not only employees of the Federal Security Service participate, but also military personnel of the Ministry of Defense and Internal Troops, even police officers armed with modern rifles, including those of foreign production, and equipped with GPS receivers, weather stations, rangefinders, etc. .d.
So how is sniping developing in Russia, what are the snipers of various law enforcement agencies armed with, what equipment and uniforms do they prefer to use? Acting snipers from the Command of the Special Operations Forces of the Ministry of Defense, a special operations brigade of the Southern Military District, one of the Airborne Forces units, the Special Forces Center of the Internal Troops of the Ministry of Internal Affairs and SOBR TsSN of the Ministry of Internal Affairs agreed to answer these questions.
Sniping tactics
Currently, in the Russian Ministry of Defense, sniper units (companies, sometimes separate platoons) are included not only in the Airborne Forces and the Marine Corps, but even in motorized rifle and tank brigades. Also, each battalion or detachment of special forces includes a sniper group, pairs of which are assigned to reconnaissance groups "for the task," as they say in the special forces. In special-purpose units of the internal troops, sniper pairs are not reduced to separate groups, but are routinely included in platoons.
For several years now, a sniper school has been operating in the Russian Ministry of Defense in Solnechnogorsk near Moscow, where trainees take three courses: the first is individual training, the second is action in a pair of snipers, and the third is obtaining the “Instructor” qualification. The training is quite difficult, so the percentage of those expelled is also high.
Similar courses operate in the FSB and FSO, and in the Ministry of Internal Affairs and in the internal troops they look with envy at colleagues from the Ministry of Defense. " It is immediately clear that the military leadership is sick of this matter, understands how snipers should act. Who wouldn't give a rifle to anyone?", - says the officer of the BB.
It is noteworthy that, regardless of the department, the steam is equipped according to a single principle. The first number is armed with the so-called precision weapon system - a non-automatic sniper rifle, also called a bolt or simply a bolt. The second number of the pair, in turn, is armed with a self-loading SVD, it also carries all the equipment, including a tactical telescope (TZT), a range finder, a weather station, etc.
The organization of the pair, where the second numbers are armed with automatic sniper rifles, is traditional for the units of the armed forces of Great Britain, France and the Federal Republic of Germany, it is sometimes called English.
In the American scheme, the second number is armed not with an automatic sniper, but assault rifle with an underbarrel grenade launcher. It is noteworthy that both schemes are present in the US military. In particular, in the Marine Corps, sniper pairs are organized according to the American scheme, and in the US Army there is an English one, where the first number is armed with an M-24 rifle, and the second with a self-loading M110.
« After the Great Patriotic War, Soviet snipers never operated in pairs. There was one shooter with an SVD. But already in Afghanistan, they began to attach a submachine gunner to the sniper for protection. He, however, did not wear any equipment, but he defended the sniper and worked with him in tandem. Snipers acted the same way during the first Chechen war.", - recalls a SOBR officer of the Ministry of Internal Affairs.
According to the interlocutor, sniper pairs of the FSB Special Forces Center were the first to work according to the English scheme, from where it gradually spread to other law enforcement agencies.
It is noteworthy that in addition to the bolt rifle, the first number for close-range combat is also armed with the Ak-74 (in the internal troops) or the silent AS / VSS (in the special forces of the GRU and the Airborne Forces).
« I carry the rifle in a backpack in a special compartment, and in my hands I have an AK-74, as well as a pistol in a holster on a belt system. It turns out that the sniper has the greatest load in the unit. Instead of AK, a sniper can be armed- says the officer of the internal troops.
His colleagues from the GRU special forces and the Airborne Forces have a similar ammunition load. True, according to the officer Airborne troops, the second number would still be advisable in addition to equip another AK with PBS.
The tasks of the sniper pairs differ from agency to agency. " The main thing for us is observation, adjustment of artillery fire and aviation actions behind enemy lines. In exceptional cases, the elimination of enemy commanders and especially important targets. The most important thing is stealth, we are first of all scouts", - said the officer of the special forces brigade of the Ministry of Defense.
His colleague from the Airborne Forces adds that in conditions of a local conflict, spetsnaz snipers have other tasks: “ In the so-called buffer zone, we, having settled covertly, can direct artillery and aviation fire at enemy detachments, as well as independently hunt for his personnel, and sometimes equipment.».
An example of such work is the actions of the SBU sniper pairs in Novorossiya last August, when they completely blocked the road between Krasnodon and Luhansk, not only adjusting artillery fire, but also independently destroying enemy vehicles.
For snipers of the SOBR Ministry of Internal Affairs, the main task is to monitor and destroy terrorists, often in urban settings. " We are involved in search and reconnaissance activities. It happens that we look for, block and destroy terrorists in settlements, in the forest or in the mountains", - admits the officer of the internal troops.
Once in position, the sniper pair deploy weapons, equipment, communications and surveillance. " The second number with the help of TZT helps the first to find and identify the target. The rangefinder determines not only the distance, but also the elevation angle of the target, and data on the wind speed, humidity and temperature are taken from the weather station. Based on these parameters, the first number calculates the vertical and horizontal corrections and enters them into the sight with the help of special drums, as they are officially called - "angle input mechanisms"- says a special forces officer of the Ministry of Defense.
But the work of the second issue does not end there. " After the shot, the second number is closely watching the target in TZT. Ideally, the sniper should hit it with the first shot, but at long range the slightest gust of wind can lead to a miss. In this case, the main task of the second issue is to track the contrail of a bullet flying next to the target and to correct for the second shot.
Depending on how the bullet passed relative to the target, the first number changes the aiming point and fires a second shot. You can, of course, again try to introduce corrections to the sight, but if the shot must be fired quickly, then it will be much faster to move the sight and the rifle to the right or left.", - explains the paratrooper officer.
“If the bullet went higher or lower, then there was an error in measuring the distance to the target. The laser rangefinder gives an accurate distance, but, unfortunately, they are not available in all units, and often the range has to be measured using special scales on the sights and TZT, ”says the special forces officer.
What's in the cases?
It should be noted that at present only the special forces of the Interior Ministry's Internal Troops are fully "packed" with domestic sniper weapons. “We are armed with and MC-116, respectively SVD and AS and VSS. The SV and MC are chambered for the domestic cartridge 7.62x54 mm, it is close to the western one .308 (7.62x51) ", - says the officer of the internal troops. Until recently, the snipers of the SOBR TsSN Ministry of Internal Affairs were also armed, but now the squad has received Finnish TRG rifles of the "Sako" company, caliber .308.
Sniper rifle SV-98
Sniper rifle MC-116
The units of the Ministry of Defense use Austrian rifles from the firm "Mannlicher" SSG-04(caliber .308) and SSG-08 (.300 and .338). “Some 'experts' like to say that the Mannlicher is a rifle designed for hunters, and that it is not suitable for special forces operating behind enemy lines. The sniper complex requires a careful attitude towards itself, all the little things are important, from this success develops. While you are running, sometimes something will fall asleep in the trunk. There may be moisture if caught in the rain, - the Airborne Forces officer shares his experience. - You take with you a can of oil and a wiper to "drive away" the barrel before firing. A good sniper will have no problem. We must watch the rifle. "
It is noteworthy that the Command of the Special Operations Forces tried to purchase the 7.62 mm NK-417 of the Heckler und Koch company as a self-loading rifle, which is used as a weapon of the second number of a sniper pair in the American Delta and DEVGRU. " A couple of years ago, they tried to push through the purchase for our needs HK-417, but failed. Thanks to Alexei Navalny, if you remember the story of the allegedly inflated prices for the purchase of Austrian Glock pistols and later with sights", - says the officer from KSSO.
Sniper rifle SSG-04
Sniper rifle SSG-08
SSG-08 caliber. 388(8.6x70) are in service only in special-purpose centers of the KSSO, causing the envy of snipers from other special forces units of the Ministry of Defense, their colleagues from law enforcement agencies.
“The ammunition of caliber .388 has many times better ballistic coefficient, longer firing range than that of .308. External factors influence much less. For example, when shooting at 500 meters, on my SV-98, I have to make corrections, make take-offs. And the shooter p.338, there is wind - no, he lies down and hits the target without any unnecessary movements. To be honest, my dream is SSG-08, but the Interior Ministry has none. In the same caliber, I would not refuse the Russian T-5000, ”says the officer of the internal troops.
A colleague from the special forces brigade agrees with him: “ On the profile, we mainly work in the mountains, maybe there are small distances compared to the plain, but the weather, altitude, pressure difference strongly affect, often you need to shoot upwards with a significant excess. Of course, from SSG-04 we hit the target, but from SSG-08 it would be much easier».
According to the SOBR officer, the Finnish TRG, due to its dimensions and barrel length, is good for solving police tasks, but the snipers of the detachment would very much like to get models of sniper rifles for 8.6x70 mm caliber.
Unlike foreign rifles, Russian ones, according to the interlocutors of the publication, have to pay increased attention and constantly improve. “I don’t want to say anything bad about SV-98 and MTs-116, but everything in them is somehow not worked out, not thought out. For example, the new version of the SV-98 - the stock is light, but what prevented you from making a folding stock? The British AW has had one for more than 20 years. The regular bipod does not hold the rifle in place. Barely, it falls to one side, which means that the sight is lost. These are sniper rifles, everything should be neat, miniature, and there the screws are the same as in the electrical outlet, ”the Interior Troops officer assessed.
But all the interlocutors of the publication declared their interest in the Russian company Orsis. “Orsis” is still damp, but I am sure that it will be brought up and everything will be fine, ”the Airborne Forces officer notes. His colleague from the Internal Troops emphasizes that the T-5000 is produced in Russia: “ The current international situation is difficult, and foreign firms may refuse to provide services. Even if you just need to modify the rifle, it is much more difficult to contact an Austrian or Finnish company than our Russian one. If necessary, I can drive up to Orsis at any time and solve all the problems».
Sniper rifle T-5000
The officers of the Ministry of Defense who use the "Mannlicher" note that from the point of view of ergonomics, there are no special complaints about the rifles. According to a sniper from the Airborne Forces, the only thing that was additionally installed for the SSG-04 were the so-called suppressors, nozzles to attenuate the sound.
« In fact, these are mufflers that mask the sound of a shot, but since the bullet is not subsonic, when it exits the bore, it overcomes the supersonic barrier and a pop is heard. It is much quieter with a suppressor", - explains the officer of the Airborne Forces.
On the MTs-116 and SV-98, SOBR officers and officers of the internal troops buy new bipods on their own, preferring Harris products, pads and adapters for Piccatini and Vivera rails.
Both in the special forces of the Ministry of Internal Affairs, and in special forces units The Ministry of Defense uses a "bullpup" large-caliber 12.7 mm, also known under the designation 6C8 "Cord". The SOBR TsSN is armed with a silent large-caliber one. It should be noted that the Russian military department purchased a small batch of South African sniper rifles Truvelo .50.
« We use 12.7x108 mm ammunition as a sniper cartridge, and 12.7x99 mm ammunition in the South African rifle, aka NATO's 50BMG. In terms of characteristics, this cartridge is better than ours. True, the Truvela itself is a very specific rifle. The recoil is so strong that the first shot pushes you off the spot. After a couple of days, your shoulder, spine and even go to the toilet more often because of the impact on the kidneys.", - the special forces officer shares his feelings.
A colleague from the Internal Troops adds that shooting with most large-caliber rifles generally affects health not in better side: “These are not only problems with the spine, lower back, etc. The pressure generated after the shot negatively affects the eyeball and the fundus. In our subdivision there is only "Kord", and in others there is also. At OSV-96, due to the flame arrester and the design of the rifle itself, the recoil momentum is less than that of the 6S8. But Kord has slightly higher accuracy. "
Large-caliber 12.7-mm sniper rifle ASVK
Silent large-caliber sniper complex VSK "Exhaust"
In all units, not only simple SVDs are in service, but also SVD-S with a folding stock. However, all interviewed snipers emphasized that they prefer to use the pre-1970 SVD. " Until that time, the rifle was produced with a groove pitch of 320 mm, but later, so that from the SVD it was possible to shoot not only special sniper ammunition, a step was made 240 mm, and this greatly affected the accuracy", - explains the officer of the internal troops.
His colleague from the Airborne Forces emphasizes that from the "old" SVDs, an experienced shooter can put bullets in a circle equal to one so-called Minute of Angel (1MOA - a bullet hitting a circle with a diameter of 2.98 cm from a distance of 100 meters). New rifles fit only 2 MOA.
I see the goal!
In the SOBR and the special forces of the internal troops, there are certain difficulties with standard sights for bolt rifles. " We regularly have PPO-3, PPO-5 and POSP. This is not to say that this is the best option. For example, they have to be "zeroed" when used every day. True, now Leupold and Night Force have appeared. But there is technical problems, because on the MC-116 and SV-98 the sight is mounted on the so-called dovetail, and all modern sights are installed on the Piccatini or Vivera rail. You have to look for adapters for your own money, then modify them.
But even here a problem arises: due to the adapter, the sight turns out to be higher than the place of the standard installation, which means that the aiming line "lifts up", which is not very good", - notes the officer of the internal troops. According to him, now the division has a Russian 5-20 sight of the company "Daedalus". The same ones are already being regularly supplied to SOBR.
“If we compare the“ Night Force ”sight and the Dedal's 5-20 sight, then the latter has lighter optics. When you look through Night Force, there is too much yellow. When shooting at night it is important to adjust the illumination of the reticle. When you look at a bright object, for example, at a lighted window of a house, you need to increase the brightness, and decrease it in a night forest. Often you have to do this very quickly in order not to lose the goal. On "Night Force" you need to open a special compartment, get a screwdriver from there and twist the backlight with it. And at 5-20 there is a special rubberized button, you press it and there is no problem, ”an officer of the Interior Troops issues a conclusion.
In addition, the 5-20 scope has a so-called blockage level indicator. " When you shoot at night, chances are you will overshoot. It is clear that in this case, especially at long range, it will not be possible to hit. It is very easy to make such a mistake on our sights. At 5-20, if you tilt the sight even one degree, the reticle starts blinking until you straighten the sight", - sums up the officer of the Interior Ministry.
Snipers of the SOBR Ministry of Internal Affairs put not only on the SV-98 and MTs-116, but also on the Finnish TRG various sights of the Leupold company, purchased for their own money.
The officers of the Ministry of Defense are also not completely satisfied with the standard sights on their Mannlichers. "The Leupold Mark-4 is a so-called multi-turn, when you make amendments you have to turn the drums for too long, so there is a great chance of losing zero," says the Airborne Forces officer.
For night shooting in the Airborne Forces and special forces of the GRU, special attachments are used - night vision devices installed in front of the lens of an optical sight. " At 500 meters, you are already shooting at the silhouette. Light loss on the attachment itself plus on the scope - that's the result. But I think that for rifles of this class like SSG-04 and SSG-08, it is better to make a separate night sight combined with a thermal imager, or just a thermal imaging sight. We do not have such yet"- complains the officer of the Airborne Forces.
The special forces of the Interior Ministry use not only standard night sights DS-4 and DS-6, but also attachments, including thermal imaging. “There are no special complaints about DS. With these scopes, I shot even at long ranges and kept within 1 MOA. The American PVS-27 is a good night nozzle, but it is very expensive. True, we sometimes manage to take them through acquaintances and friends. When performing service and combat missions, we mainly work at a range of 350-500 meters, so it is much more convenient to put the attachment in front of the sight, ”explains the Interior Ministry officer.
According to him, in the last trip, the snipers of his subdivision managed to test the thermal imaging attachment of the Infratek company: “ The weather was bad. Fog. Visibility 5-10 meters. And through the nozzle, I could freely conduct aimed fire at 250-300 meters. There are much better products, from the same "Daedalus", but for us, alas, they are not bought».
To be continued…
